IDES Prospector Already have an account? Login Here

IDES

ALCOM® PC 740/1.2 GF30 PTFE13 Si2

Polycarbonate

Glass Fiber Reinforcement

Supplied by Albis Plastic GmbH

The technical datasheet with complete property values for ALCOM® PC 740/1.2 GF30 PTFE13 Si2 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Filler / Reinforcement 
  • Glass Fiber Reinforcement
Additive 
  • PTFE + Silicone Lubricant
Features 
  • High Stiffness
  • Lubricated
  
Uses 
  • Bearings
  • Bushings
  • Machine/Mechanical Parts
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2
Tensile Stress (Break)
psi
 ISO 527-2
Tensile Strain (Break)
%
 ISO 527-2
Flexural Modulus
psi
 ISO 178
Flexural Strength
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eU
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306/B50
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0591 in)
 
 UL 94
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ALCOM® PC 740/1.2 GF30 PTFE13 Si2, ALCOM PC 74012 GF30 PTFE13 Si2, ALCOM® PC , ALCOM PC, ALCOMPC74012GF30PTFE13Si2, ALCOMPC, PC 740 1 2 GF 30 PTFE 13 Si 2, PC 740, 740, PC740/1.2 GF30 PTFE13 Si2, PC74012 GF30 PTFE13 Si2, PC740:1.2 GF30 PTFE13 Si2, PC740+1.2 GF30 PTFE13 Si2, PC740-1.2 GF30 PTFE13 Si2, PC740_1.2 GF30 PTFE13 Si2, PC740 1.2 GF30 PTFE13 Si2, PC740, 740 1 2 GF 30 PTFE 13 Si 2, PC74012GF30PTFE13Si2, PC740_12 GF30 PTFE13 Si2, PC740 12 GF30 PTFE13 Si2, 740/1.2 GF30 PTFE13 Si2, 74012 GF30 PTFE13 Si2, 740:1.2 GF30 PTFE13 Si2, 740+1.2 GF30 PTFE13 Si2, 740-1.2 GF30 PTFE13 Si2, 740_1.2 GF30 PTFE13 Si2, 740 1.2 GF30 PTFE13 Si2, 7401, 12, 2GF, GF30, 30PTFE, PTFE13, 13Si, Si2, PC740_12GF30PTFE13Si2, 74012GF30PTFE13Si2, 740_12 GF30 PTFE13 Si2, 740 12 GF30 PTFE13 Si2, 740_12GF30PTFE13Si2, Polycarbonate, PC, Albis Euro, 1740, 740PC
Features
Features may also be described by the following terms: High Stiffness.
Uses
Uses may also be described by the following terms: Machine Parts, Mechanical Parts, Machine/Mechanical Parts.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.