IDES Prospector Already have an account? Login Here

IDES

BLENDEX 200

Acrylonitrile Butadiene Styrene

Supplied by Chemtura

The technical datasheet with complete property values for BLENDEX 200 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Blendex® 200 is a high flow color concentrate ABS resin.
Provides compatibility with a wider range of ABS grades than many color concentrate bases.
Provides good dimensional stability, heat distortion and impact resistance.
Allows better pigment dispersion than pellets.
Allows concentrate manufacturers to produce both pelletized and dry blend concentrate.
Provides a base resin with less heat history than pellets.
Allows for high flow.
Can be used as a color concentrate base resin in ABS, PVC, and SAN.
Suitable for alloying with polymers to improve melt flow, heat distortion, and other properties.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • North America
  
Features 
  • Food Contact Acceptable
  • High Flow
  
Agency Ratings 
Appearance 
  • White
Forms 
  • Powder
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Apparent Density
g/cm³
 ASTM D1895
Melt Mass-Flow Rate (MFR) (230°C/3.8 kg)
g/10 min
 ASTM D1238
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (0.125 in)
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ASTM D785
Additional Information
Volatiles: 1.5 %
Mean Particle size: 250 microns
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: BLENDEX 200, BLENDEX , BLENDEX200, 200, Acrylonitrile Butadiene Styrene, ABS, Chemtura, AcrylonitrileButadieneStyrene
Features
Features may also be described by the following terms: High Flow, High Melt, High MFI.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.