IDES Prospector Already have an account? Login Here

IDES

BLENDEX 713(S)

Alphamethystyrene Acrilonitrile Butadiene Styrene

Supplied by Chemtura

The technical datasheet with complete property values for BLENDEX 713(S) is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Blendex® 713(S) is an alpha-methylstyrene acrylonitrile butadiene styrene (AMS-ABS) heat and impact modifier.
Offers compatibility at all ratios in PVC and SAN.
Provides a good balance of high heat and impact performance.
Designed to improve heat and impact strength in rigid PVC and SAN applications.
Suitable for calendering and extrusion applications.
Can be used at loading levels of up to 100% in compounding.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Agency Ratings 
Appearance 
  • White
Forms 
  • Powder
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Apparent Density
g/cm³
ISO 60
Melt Mass-Flow Rate (MFR) (220°C/10.0 kg)
g/10 min
ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
ISO 527-2
Tensile Stress (Yield)
psi
ISO 527-2
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength
ft·lb/in²
ISO 180
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
ISO 306/B120
Additional Information
Mean Particle Size: <2 mm
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: BLENDEX 713, BLENDEX 713(S), BLENDEX 713S, BLENDEX , BLENDEX713S, 713, 713 S, 713(S), 713S, Alphamethystyrene Acrilonitrile Butadiene Styrene, AMS-ABS, AMSABS, AMS:ABS, AMS/ABS, AMS+ABS, AMS_ABS, AMS ABS, Alphamethylstyrene, AMS, Chemtura, AlphamethystyreneAcrilonitrileButadieneStyrene, S713
Agency Ratings
This plastic material has 3 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EEC (1), FDA (1), BGA (1).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.