WPP PP PPC5GF2-Black Washington Penn Polypropylene Copolymer (Glass Fiber Reinforcement, 20%)

General

Material Status

Commercial: Active

Availability

North America

Filler / Reinforcement

Glass Fiber Reinforcement, 20% Filler by Weight

Additive

Heat Stabilizer

Impact Modifier

UV Stabilizer

Features

Good UV Resistance

Heat Stabilized

Impact Modified

Uses

Automotive Applications

Automotive Specifications

Appearance

Black

Colors Available

Forms

Pellets

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)		g/10 min	ISO 1133
Mechanical	Nominal Value	Unit	Test Method
Tensile Stress (Yield)		psi	ISO 527-2/5
Flexural Modulus - Tangent²		psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact Strength			ISO 180
-40°F		ft·lb/in²
73°F		ft·lb/in²
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed		°F	ISO 75-2/B
264 psi, Unannealed		°F	ISO 75-2/A
Additional Information
Filler Content, In-house #1003-02: 20%
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: WPP PP PPC5GF2-Black, WPP PP PPC5GF2Black, WPP PP , WPPPPPPC5GF2Black, WPPPP, PPC 5 GF 2, PPPPC 5 GF 2 Black, PPPPC 5 GF 2, PPC5GF2, PPPPC5GF2-Black, PPPPC5GF2Black, PPPPC5GF2:Black, PPPPC5GF2/Black, PPPPC5GF2+Black, PPPPC5GF2_Black, PPPPC5GF2 Black, PPPPC5, PPPPC5GF2, PPC 5 GF 2 Black, PPC5GF2-Black, PPC5GF2Black, PPC5GF2:Black, PPC5GF2/Black, PPC5GF2+Black, PPC5GF2_Black, PPC5GF2 Black, PPC5, 5GF, GF2, 2Black, Polypropylene Copolymer, PP Copolymer, Polypropylene, PP, Washington Penn, PolypropyleneCopolymer, PPCopolymer, 5PPC, 5PPPPC
Features
Features may also be described by the following terms: Good UV Resistance, UV Resistant, Ultraviolet Resistant, Ultraviolet Light Resistant, Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.
Automotive Specifications
This plastic material has approval for 3 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): FORD (1), CHRYSLER (1), GM (1).

Injection	Nominal Value	Unit
Drying Temperature		°F
Drying Time		hr
Rear Temperature		°F
Middle Temperature		°F
Front Temperature		°F
Nozzle Temperature		°F
Mold Temperature		°F
Injection Pressure		psi
Holding Pressure		psi
Back Pressure		psi
Clamp Tonnage		tons/in²
Cushion		in
Injection Notes
Injection Speed: 0.75 to 2.5 in/s Zone 4 Temperature: 440 to 460°F Hot Runner Temperature: 420 to 450°F Hydraulic Oil Temperature: 110 to 125°F Shot Capacity vs. Barrel Capacity: 2.5 to 4 Screw Decompression: 0.1 to 0.25 in

Notes

¹Typical properties: these are not to be construed as specifications.

²0.079 in/min

WPP PP PPC5GF2-Black

Polypropylene Copolymer

Glass Fiber Reinforcement, 20%

Supplied by Washington Penn Plastic Co. Inc.