WPP PP PPC5TF1-Natural Washington Penn Polypropylene Copolymer (Talc Filler, 10%)

General

Material Status

Commercial: Active

Availability

North America

Filler / Reinforcement

Talc Filler, 10% Filler by Weight

Additive

Heat Stabilizer

Features

Copolymer

Good Impact Resistance

Good Processability

Good Stiffness

Heat Stabilized

Uses

Automotive Applications

Automotive Interior Trim

Automotive Specifications

Appearance

Colors Available

Natural Color

Forms

Pellets

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)		g/10 min	ISO 1133
Mechanical	Nominal Value	Unit	Test Method
Tensile Stress (Yield)		psi	ISO 527-2
Flexural Modulus - Tangent		psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact Strength			ISO 180/1A
-40°F		ft·lb/in²
-4°F		ft·lb/in²
73°F		ft·lb/in²
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed		°F	ISO 75-2/B
264 psi, Unannealed		°F	ISO 75-2/A
Additional Information
Filler Content, ISO 3451/1: 10%
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: WPP PP PPC5TF1-Natural, WPP PP PPC5TF1Natural, WPP PP , WPPPPPPC5TF1Natural, WPPPP, PPC 5 TF 1, PPPPC 5 TF 1 Natural, PPPPC 5 TF 1, PPC5TF1, PPPPC5TF1-Natural, PPPPC5TF1Natural, PPPPC5TF1:Natural, PPPPC5TF1/Natural, PPPPC5TF1+Natural, PPPPC5TF1_Natural, PPPPC5TF1 Natural, PPPPC5, PPPPC5TF1, PPC 5 TF 1 Natural, PPC5TF1-Natural, PPC5TF1Natural, PPC5TF1:Natural, PPC5TF1/Natural, PPC5TF1+Natural, PPC5TF1_Natural, PPC5TF1 Natural, PPC5, 5TF, TF1, 1Natural, Polypropylene Copolymer, PP Copolymer, Polypropylene, PP, Washington Penn, PolypropyleneCopolymer, PPCopolymer, 5PPC, 5PPPPC
Features
Features may also be described by the following terms: Good Stiffness, Good Processability, Easy Processing, Good Impact Resistance, Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.
Automotive Specifications
This plastic material has approval for 1 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): FORD (1).

Injection	Nominal Value	Unit
Drying Temperature		°F
Drying Time		hr
Rear Temperature		°F
Middle Temperature		°F
Front Temperature		°F
Nozzle Temperature		°F
Mold Temperature		°F
Injection Pressure		psi
Holding Pressure		psi
Back Pressure		psi
Clamp Tonnage		tons/in²
Cushion		in
Injection Notes
Injection Speed: 1.5 to 2.5 in/s Zone 4 Temperature: 435 to 445°F Hot Runner Temperature: 435 to 460°F Hydraulic Oil Temperature: 110 to 125°F Shot Capacity vs. Barrel Capacity: 2.5 to 4 Screw Decompression: 0.1 to 0.25 in

Notes

¹Typical properties: these are not to be construed as specifications.

WPP PP PPC5TF1-Natural

Polypropylene Copolymer

Talc Filler, 10%

Supplied by Washington Penn Plastic Co. Inc.