IDES Prospector Already have an account? Login Here

IDES

WPP TPO TPO-277 UV RJ3

Compounded Polypropylene

Mineral Filler, 15%

Supplied by Washington Penn Plastic Co. Inc.

The technical datasheet with complete property values for WPP TPO TPO-277 UV RJ3 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Mineral Filler, 15% Filler by Weight
Additive 
  • UV Stabilizer
Features 
  • Ductile
  • Good Impact Resistance
  • Good Toughness
  • Good UV Resistance
  • Medium Rigidity
Uses 
  • Automotive Applications
  • Automotive Exterior Parts
  
Automotive Specifications 
Appearance 
  • Colors Available
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Yield)
psi
 ASTM D638
Tensile Elongation 2 (Break)
%
 ASTM D638
Flexural Modulus - Tangent 3
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Gardner Impact (-22°F)
in·lb
 ASTM D3029
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Additional Information
Tensile Elongation at Break, ASTM D638, 50 mm/min: >500%
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: WPP TPO TPO-277 UV RJ3, WPP TPO TPO277 UV RJ3, WPP TPO , WPPTPOTPO277UVRJ3, WPPTPO, TPOTPO 277 UV RJ 3, TPO, TPOTPO-277 UV RJ3, TPOTPO277 UV RJ3, TPOTPO:277 UV RJ3, TPOTPO/277 UV RJ3, TPOTPO+277 UV RJ3, TPOTPO_277 UV RJ3, TPOTPO 277 UV RJ3, TPOTPO277, TPOTPO, TPO 277 UV RJ 3, TPOTPO277UVRJ3, TPO-277 UV RJ3, TPO277 UV RJ3, TPO:277 UV RJ3, TPO/277 UV RJ3, TPO+277 UV RJ3, TPO_277 UV RJ3, TPO 277 UV RJ3, TPO277, 277UV, UVRJ, RJ3, TPOTPO_277UVRJ3, TPO277UVRJ3, TPO_277UVRJ3, Polypropylene, Compounded, Polypropylene Compounded, Polypropylene, PP, Washington Penn, PolypropyleneCompounded, 277TPO, 277TPOTPO
Features
Features may also be described by the following terms: Good UV Resistance, UV Resistant, Ultraviolet Resistant, Ultraviolet Light Resistant, Good Toughness, Tough, Medium Rigidity, Good Rigidity, Good Impact Resistance.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.
Automotive Specifications
This plastic material has approval for 1 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): CHRYSLER (1).
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
30.051 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.