IDES Prospector Already have an account? Login Here

IDES

WPP PE PEH1TF2-Black

Polyethylene

Talc Filler, 24%

Supplied by Washington Penn Plastic Co. Inc.

The technical datasheet with complete property values for WPP PE PEH1TF2-Black is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Talc Filler, 24% Filler by Weight
Additive 
  • Heat Stabilizer
Features 
  • Good Melt Strength
  • Heat Stabilized
  
Uses 
  • Automotive Applications
Automotive Specifications 
Appearance 
  • Black
  • Colors Available
  
Forms 
  • Pellets
Processing Method 
  • Blow Molding
  • Extrusion
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/21.6 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Yield)
psi
 ISO 527-2/50
Tensile Strain (Break)
%
 ISO 527-2/50
Flexural Modulus - Tangent 2
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength
     ISO 180
-40°F
ft·lb/in²
  
-4°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (66 psi, Unannealed)
°F
 ISO 75-2/B
Flammability
Nominal Value
Unit
Test Method
Burning Rate
in/min
 ISO 3795
Additional Information
Filler Content, In-house #1003-02: 24%
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: WPP PE PEH1TF2-Black, WPP PE PEH1TF2Black, WPP PE , WPPPEPEH1TF2Black, WPPPE, PEH 1 TF 2, PEPEH 1 TF 2 Black, PEPEH 1 TF 2, PEH1TF2, PEPEH1TF2-Black, PEPEH1TF2Black, PEPEH1TF2:Black, PEPEH1TF2/Black, PEPEH1TF2+Black, PEPEH1TF2_Black, PEPEH1TF2 Black, PEPEH1, PEPEH1TF2, PEH 1 TF 2 Black, PEH1TF2-Black, PEH1TF2Black, PEH1TF2:Black, PEH1TF2/Black, PEH1TF2+Black, PEH1TF2_Black, PEH1TF2 Black, PEH1, 1TF, TF2, 2Black, Polyethylene, Unspecified, Polyethylene Unspecified, PE, Unspecified, PE Unspecified, Polyethylene, PE, Washington Penn, PolyethyleneUnspecified, PEUnspecified, 1PEH, 1PEPEH
Features
Features may also be described by the following terms: Good Melt Strength, Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.
Automotive Specifications
This plastic material has approval for 1 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): FORD (1).
Notes
1Typical properties: these are not to be construed as specifications.
20.079 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.