IDES Prospector Already have an account? Login Here

IDES

WPP PP PPC3TF3-Black

Polypropylene Copolymer

Talc Filler, 30%

Supplied by Washington Penn Plastic Co. Inc.

The technical datasheet with complete property values for WPP PP PPC3TF3-Black is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Talc Filler, 30% Filler by Weight
Additive 
  • Heat Stabilizer
Features 
  • Copolymer
  • Good Impact Resistance
  • Good Processability
  • Good Stiffness
  • Heat Stabilized
Uses 
  • Automotive Applications
  • Automotive Interior Trim
  
Automotive Specifications 
 
Appearance 
  • Black
  • Colors Available
  
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Yield)
psi
 ISO 527-2
Flexural Modulus - Secant
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Annealed)
°F
 ISO 75-2/A
Additional Information
Filler Content, ISO 3451/1: 28%
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: WPP PP PPC3TF3-Black, WPP PP PPC3TF3Black, WPP PP , WPPPPPPC3TF3Black, WPPPP, PPC 3 TF 3, PPPPC 3 TF 3 Black, PPPPC 3 TF 3, PPC3TF3, PPPPC3TF3-Black, PPPPC3TF3Black, PPPPC3TF3:Black, PPPPC3TF3/Black, PPPPC3TF3+Black, PPPPC3TF3_Black, PPPPC3TF3 Black, PPPPC3, PPPPC3TF3, PPC 3 TF 3 Black, PPC3TF3-Black, PPC3TF3Black, PPC3TF3:Black, PPC3TF3/Black, PPC3TF3+Black, PPC3TF3_Black, PPC3TF3 Black, PPC3, 3TF, TF3, 3Black, Polypropylene Copolymer, PP Copolymer, Polypropylene, PP, Washington Penn, PolypropyleneCopolymer, PPCopolymer, 3PPC, 3PPPPC
Features
Features may also be described by the following terms: Good Stiffness, Good Processability, Easy Processing, Good Impact Resistance, Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.
Automotive Specifications
This plastic material has approval for 2 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): CHRYSLER (1), ASTM (1).
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Mold Temperature
°F
  
Injection Pressure
psi
  
Holding Pressure
psi
  
Back Pressure
psi
  
Clamp Tonnage
tons/in²
  
Cushion
in
  
Injection Notes
Injection Speed: 1.5 to 2.5 in/s
Zone 4 Temperature: 445 to 455°F
Hot Runner Temperature: 445 to 475°F
Hydraulic Oil Temperature: 110 to 125°F
Shot Capacity vs. Barrel Capacity: 2.5 to 4
Screw Decompression: 0.1 to 0.25 in
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.