SABIC LLDPE R50035S SABIC Polyethylene, Medium Density

General

Material Status

Availability

Additive

Features

Forms

Processing Method

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)		g/10 min	ISO 1133
Environmental Stress-Cracking Resistance (100% Igepal, Compression Molded, F50)		hr	ASTM D1693A
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus - 1% Secant (Compression Molded)		psi	ASTM D638
Tensile Strength			ASTM D638
Yield, Compression Molded		psi
Break, Compression Molded		psi
Tensile Elongation (Break, Compression Molded)		%	ASTM D638
Flexural Modulus (Compression Molded)		psi	ASTM D790
Flexural Strength (Compression Molded)		psi	ASTM D790
Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D, Compression Molded)			ASTM D2240
Thermal	Nominal Value	Unit	Test Method
Brittleness Temperature		°F	ASTM D746
Vicat Softening Temperature		°F	ASTM D1525
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SABIC® LLDPE R50035S, SABIC LLDPE R50035S, SABIC® LLDPE , SABIC LLDPE, SABICLLDPER50035S, SABICLLDPE, LLDPER 50035 S, LLDPER50035S, LLDPER50035, LLDPE, R 50035 S, R50035S, R50035, 50035S, Polyethylene, Medium Density, Polyethylene Medium Density, MDPE, Polyethylene, PE, SABIC, PolyethyleneMediumDensity, 50035R, 50035LLDPER
Features
Features may also be described by the following terms: Low Warpage, Low Warp, Good Toughness, Tough, High Rigidity, High Gloss, High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant.

Notes

¹Typical properties: these are not to be construed as specifications.

SABIC® LLDPE R50035S