IDES Prospector Already have an account? Login Here

IDES

SABIC® HDPE M200056

High Density Polyethylene Copolymer

Supplied by Saudi Basic Industries Corporation (SABIC)

The technical datasheet with complete property values for SABIC® HDPE M200056 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • Copolymer
  • Food Contact Acceptable
  • Good Moldability
  • Good Stiffness
  • Good Toughness
  • Low Warpage
  • Narrow Molecular Weight Distribution
Uses 
  • Caps
  • Closures
  • Containers
  • Cups
  • Food Containers
  • Household Goods
  • Toys
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Environmental Stress-Cracking Resistance (100% Igepal, Compression Molded, F50)
hr
 ASTM D1693B
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus - 1% Secant (Compression Molded)
psi
 ASTM D638
Tensile Strength
     ASTM D638
Yield, Compression Molded
psi
  
Break, Compression Molded
psi
  
Tensile Elongation (Break, Compression Molded)
%
 ASTM D638
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (Compression Molded)
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D, Compression Molded)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Brittleness Temperature
°F
 ASTM D746
Vicat Softening Temperature
°F
 ASTM D1525 2
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SABIC® HDPE M200056, SABIC HDPE M200056, SABIC® HDPE , SABIC HDPE, SABICHDPEM200056, SABICHDPE, HDPEM 200056, HDPEM200056, HDPE, M 200056, M200056, Polyethylene, High Density Copolymer, Polyethylene High Density Copolymer, HDPE Copolymer, Polyethylene, PE, SABIC, PolyethyleneHighDensityCopolymer, HDPECopolymer, 200056M, 200056HDPEM
Features
Features may also be described by the following terms: Good Stiffness, Good Toughness, Tough, Low Warpage, Low Warp, Good Moldability, Narrow Molecular Weight Distribution, Narrow MW Distribution.
Uses
Uses may also be described by the following terms: Closure Caps, Caps, Cap, Food Containers, Food Container, Household Goods, Housewares.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2Loading 1 (10 N)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.