IDES Prospector Already have an account? Login Here

IDES

SABIC® HDPE F00952EQ

High Density Polyethylene Copolymer

Supplied by Saudi Basic Industries Corporation (SABIC)

The technical datasheet with complete property values for SABIC® HDPE F00952EQ is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
SABIC® HDPE F00952EQ resin is a high molecular weight, high density polyethylene copolymer which has a broad molecular weight distribution. The design of the product, molecular architecture and density, gives F00952EQ a unique combination of easy extrusion and high melt strength with strong physical properties which makes it suitable for producing very thin films with excellent strength and rigidity. The material contains antioxidant.

SABIC® HDPE F00952EQ resin is recommended for blown film extrusion. This product is suggested for the manufacture of high strength grocery sacks, shopping bags and high quality thin films for multi wall sack liners and replacement for thin paper products.

The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Additive 
  • Antioxidant
Features 
  • Antioxidant
  • Copolymer
  • Good Melt Strength
  • High Molecular Weight
  • High Rigidity
  • High Strength
  • Wide Molecular Weight Distribution
Uses 
  • Bags
  • Film
  • Liners
Forms 
  • Pellets
Processing Method 
  • Blown Film
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR)
     ISO 1133
190°C/2.16 kg
g/10 min
  
190°C/21.6 kg
g/10 min
  
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Secant Modulus
     ASTM D882
MD: 0.59 mil, Blown Film
psi
  
TD: 0.59 mil, Blown Film
psi
  
Tensile Strength
     ASTM D882
MD: Yield, 0.59 mil, Blown Film
psi
  
TD: Yield, 0.59 mil, Blown Film
psi
  
MD: Break, 0.59 mil, Blown Film
psi
  
TD: Break, 0.59 mil, Blown Film
psi
  
Tensile Elongation
     ASTM D882
MD: Break, 0.59 mil, Blown Film
%
  
TD: Break, 0.59 mil, Blown Film
%
  
Dart Drop Impact (0.59 mil, Blown Film)
g
 ASTM D1709
Elmendorf Tear Strength
     ASTM D1922
MD: 0.59 mil, Blown Film
g
  
TD: 0.59 mil, Blown Film
g
  
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ASTM D1525
Additional Information
Properties determined on 15 µm blown film with a blow up ratio of 1:4.
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SABIC® HDPE F00952EQ, SABIC HDPE F00952EQ, SABIC® HDPE , SABIC HDPE, SABICHDPEF00952EQ, SABICHDPE, HDPEF 00952 EQ, HDPEF00952EQ, HDPEF00952, HDPE, F 00952 EQ, F00952EQ, F00952, 00952EQ, Polyethylene, High Density Copolymer, Polyethylene High Density Copolymer, HDPE Copolymer, Polyethylene, PE, SABIC, PolyethyleneHighDensityCopolymer, HDPECopolymer, 00952F, 00952HDPEF
Features
Features may also be described by the following terms: High Rigidity, High Strength, Wide Molecular Weight Distribution, Wide MW Distribution, Broad Molecular Weight Distribution, High Molecular Weight, High MW, Good Melt Strength.
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.