SABIC HDPE F01552 SABIC Polyethylene, High Density (MMW)

General

Material Status

Availability

Features

Uses

Forms

Processing Method

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR)			ISO 1133
190°C/2.16 kg		g/10 min
190°C/21.6 kg		g/10 min
Films	Nominal Value	Unit	Test Method
Film Thickness - Tested		mil
Secant Modulus			ASTM D882
MD: 0.59 mil		psi
TD: 0.59 mil		psi
Tensile Strength			ASTM D882
MD: Yield, 0.59 mil		psi
TD: Yield, 0.59 mil		psi
MD: Break, 0.59 mil		psi
TD: Break, 0.59 mil		psi
Tensile Elongation			ASTM D882
MD: Break, 0.59 mil		%
TD: Break, 0.59 mil		%
Dart Drop Impact		g	ASTM D1709
Elmendorf Tear Strength			ASTM D1922
MD		g
TD		g
Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature		°F	ASTM D1525
Additional Information
Properties determined on 15 µm blown film with a blow up ratio of 1:4.
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SABIC® HDPE F01552, SABIC HDPE F01552, SABIC® HDPE , SABIC HDPE, SABICHDPEF01552, SABICHDPE, HDPEF 01552, HDPEF01552, HDPE, F 01552, F01552, Polyethylene, High Density, Polyethylene High Density, Polyethylene, High Density (MMW), Polyethylene High Density MMW, HDPE, MMW, HDPE MMW, Polyethylene, PE, SABIC, PolyethyleneHighDensityMMW, HDPEMMW, 01552F, 01552HDPEF
Features
Features may also be described by the following terms: Good Drawdown, Good draw down, Medium Molecular Weight Distribution, Wide Molecular Weight Distribution, Medium MW Distribution, Wide MW Distribution, Medium Molecular Weight, Medium MW.

Extrusion	Nominal Value	Unit
Melt Temperature		°F

SABIC® HDPE F01552