Already have an account? Login Here

IDES

ALAMID® 6 GF 30 KZ 4

Polyamide 6

Glass Fiber Reinforcement, 30%

Supplied by LEIS Polytechnik - polymere Werkstoffe GmbH

The technical datasheet with complete property values for ALAMID® 6 GF 30 KZ 4 is available to members of the Prospector Plastics Database.
Register to view full datasheet.

General

Material Status

Commercial: Active

Availability

Europe

Filler / Reinforcement

Glass Fiber Reinforcement, 30% Filler by Weight

Additive

Impact Modifier

Features

High Impact Resistance

Impact Modified

Low Temperature Impact Resistance

Forms

Pellets

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Molding Shrinkage		%	ISO 294-4
Water Absorption (Saturation, 73°F)		%	ISO 62
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus		psi	ISO 527-2
Tensile Stress (Yield)		psi	ISO 527-2
Tensile Strain (Break)		%	ISO 527-2
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength		ft·lb/in²	ISO 179
Charpy Unnotched Impact Strength		ft·lb/in²	ISO 179
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (66 psi, Unannealed)		°F	ISO 75-2/B
Melting Temperature (DSC)		°F	ISO 3146
Thermal Conductivity		Btu·in/hr/ft²/°F	ISO 8302
Electrical	Nominal Value	Unit	Test Method
Surface Resistivity		ohms	IEC 60093
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ALAMID® 6 GF 30 KZ 4, ALAMID 6 GF 30 KZ 4, ALAMID® , ALAMID, ALAMID6GF30KZ4, 6 GF 30 KZ 4, 6GF, GF30, 30KZ, KZ4, 6GF30KZ4, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, Leis Polytechnik, Polyamide6, Nylon6, GF6
Generic Name
Generic Name may also be described by the following terms: PA6.
Features
Features may also be described by the following terms: Low Temperatuer Impact Resistance, Low Temp Impact Resistance, High Impact Resistance.

Notes

¹Typical properties: these are not to be construed as specifications.