IDES Prospector Already have an account? Login Here

IDES

LEIS PVDF CF 30

Polyvinylidene Fluoride

Carbon Fiber Reinforcement, 30%

Supplied by LEIS Polytechnik - polymere Werkstoffe GmbH

The technical datasheet with complete property values for LEIS PVDF CF 30 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Carbon Fiber Reinforcement, 30% Filler by Weight
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Molding Shrinkage
%
 ISO 294-4
Water Absorption (Saturation, 73°F)
%
 ISO 62
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2
Tensile Stress (Yield)
psi
 ISO 527-2
Tensile Strain (Break)
%
 ISO 527-2
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (66 psi, Unannealed)
°F
 ISO 75-2/B
Melting Temperature (DSC)
°F
 ISO 3146
Thermal Conductivity
Btu·in/hr/ft²/°F
 ISO 8302
Additional Information
Values were tested in accordance with DIN test standards.
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: LEIS PVDF CF 30, LEIS , LEISPVDFCF30, PVDF CF 30, PVDFCF, CF30, PVDFCF30, Polyvinylidene Fluoride, PVDF, Fluoropolymer, Leis Polytechnik, PolyvinylideneFluoride, CFPVDF
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.