|
Density
|
|
g/cm³
|
ASTM D1505 |
|
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
|
|
g/10 min
|
ASTM D1238 |
|
Film Thickness - Tested
|
|
mil
|
|
|
Secant Modulus
|
|
|
ASTM D882 |
|
2% Secant, MD: 3.9 mil, Blown Film
|
|
psi
|
|
|
2% Secant, TD: 3.9 mil, Blown Film
|
|
psi
|
|
|
Tensile Strength
|
|
|
ASTM D882 |
|
MD: Yield, 3.9 mil, Blown Film
|
|
psi
|
|
|
TD: Yield, 3.9 mil, Blown Film
|
|
psi
|
|
|
MD: Break, 3.9 mil, Blown Film
|
|
psi
|
|
|
TD: Break, 3.9 mil, Blown Film
|
|
psi
|
|
|
Tensile Elongation
|
|
|
ASTM D882 |
|
MD: Break, 3.9 mil, Blown Film
|
|
%
|
|
|
TD: Break, 3.9 mil, Blown Film
|
|
%
|
|
|
Dart Drop Impact (3.9 mil, Blown Film)
|
|
g
|
ASTM D1709 |
|
Elmendorf Tear Strength
|
|
|
ASTM D1922 |
|
MD: 3.9 mil, Blown Film
|
|
g
|
|
|
TD: 3.9 mil, Blown Film
|
|
g
|
|
|
Gloss (45°, 3.94 mil, Blown Film)
|
|
|
ASTM D2457 |
|
Haze (3.94 mil, Blown Film)
|
|
%
|
ASTM D1003 |
|
Film properties taken from blown film processed at a blow up ratio of 2:1.
|
|
Product names can be difficult to match. You may have searched any one of these terms to find this product: Alkathene™ XDS34, Alkathene XDS34, Alkathene™ , Alkathene, AlkatheneXDS34, XDS 34, XDS34, Polyethylene, Low Density, Polyethylene Low Density, LDPE, Polyethylene, PE, Qenos, PolyethyleneLowDensity, 34XDS
|
|
Uses may also be described by the following terms: Closure Caps, Caps, Cap.
|
|
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1), AS (1).
|