IDES Prospector Already have an account? Login Here

IDES

Alkathene™ LDF433AB

Linear Low Density Polyethylene

Supplied by Qenos Pty Ltd

The technical datasheet with complete property values for Alkathene™ LDF433AB is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
LDF433AB is a low density polyethylene designed for a variety of medium to heavy gauge (70 - 200µm) applications where increased stiffness is required. LDF433AB is formulated with antiblock and stabilisation (BHT free).

LDF433AB is intended for use in medium to heavy gauge (70 - 200µm) applications where increased stiffness is required.

LDF433AB is suitable for food contact applications and conforms to the requirements of the United States Food and Drug Administration CFR 21 177.1520, paragraph (c), item 2.1.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Additive 
  • Antiblock
Features 
  • Antiblocking
  • Food Contact Acceptable
  • Good Stiffness
Uses 
  • Film
Agency Ratings 
Forms 
  • Pellets
Processing Method 
  • Film Extrusion
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Coefficient of Friction (Blown Film)
 
 ASTM D1894
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Secant Modulus
     ASTM D882
2% Secant, MD: 3.9 mil
psi
  
2% Secant, TD: 3.9 mil
psi
  
Tensile Strength
     ASTM D882
MD: Yield, 3.9 mil
psi
  
TD: Yield, 3.9 mil
psi
  
MD: Break, 3.9 mil
psi
  
TD: Break, 3.9 mil
psi
  
Tensile Elongation
     ASTM D882
MD: Break, 3.9 mil
%
  
TD: Break, 3.9 mil
%
  
Dart Drop Impact (3.9 mil, Blown Film)
g
 ASTM D1709
Elmendorf Tear Strength
     ASTM D1922
MD: 3.9 mil
g
  
TD: 3.9 mil
g
  
Optical
Nominal Value
Unit
Test Method
Gloss (3.94 mil, Blown Film)
 
 ASTM D2457
Haze (3.94 mil, Blown Film)
%
 ASTM D1003
Additional Information
Film properties taken from blown film processed at a blow up ratio of 3.2:1.
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Alkathene™ LDF433AB, Alkathene LDF433AB, Alkathene™ , Alkathene, AlkatheneLDF433AB, LDF 433 AB, LDF433AB, LDF433, 433AB, Polyethylene, Linear Low Density, Polyethylene Linear Low Density, LLDPE, Polyethylene, PE, Qenos, PolyethyleneLinearLowDensity, 433LDF
Features
Features may also be described by the following terms: Antiblocking, Unspecified Antiblock, Good Stiffness.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.