IDES Prospector Already have an account? Login Here

IDES

Alkathene™ Ultra LDD201

Linear Low Density Polyethylene

Supplied by Qenos Pty Ltd

The technical datasheet with complete property values for Alkathene™ Ultra LDD201 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
LDD201 is a low density polyethylene designed for a variety of medium to heavy gauge (50 - 150µm) general purpose film applications. LDD201 is formulated with a process stabilisation additive package but contains no antiblock or slip additives.

LDD201 is intended for use in medium to heavy gauge (50 - 150µm) general purpose film applications and blending into other film grades.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Additive 
  • Processing Stabilizer
Features 
  • General Purpose
Uses 
  • Blending
  • Film
  
Agency Ratings 
Forms 
  • Pellets
Processing Method 
  • Film Extrusion
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Coefficient of Friction (Blown Film)
 
 ASTM D1894
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Secant Modulus
     ASTM D882
2% Secant, MD: 2.0 mil, Blown Film
psi
  
2% Secant, TD: 2.0 mil, Blown Film
psi
  
Tensile Strength
     ASTM D882
MD: Yield, 2.0 mil, Blown Film
psi
  
TD: Yield, 2.0 mil, Blown Film
psi
  
MD: Break, 2.0 mil, Blown Film
psi
  
TD: Break, 2.0 mil, Blown Film
psi
  
Tensile Elongation
     ASTM D882
MD: Break, 2.0 mil, Blown Film
%
  
TD: Break, 2.0 mil, Blown Film
%
  
Dart Drop Impact (2.0 mil, Blown Film)
g
 ASTM D1709
Elmendorf Tear Strength
     ASTM D1922
MD: 2.0 mil
g
  
TD: 2.0 mil
g
  
Optical
Nominal Value
Unit
Test Method
Gloss (45°, 1.97 mil, Blown Film)
 
 ASTM D2457
Haze (1.97 mil, Blown Film)
%
 ASTM D1003
Additional Information
Film properties taken from blown film processed at a blow up ratio of 3.2:1.
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Alkathene™ Ultra LDD201, Alkathene Ultra LDD201, Alkathene™ Ultra , Alkathene Ultra, AlkatheneUltraLDD201, AlkatheneUltra, UltraLDD 201, UltraLDD201, Ultra, LDD 201, LDD201, Polyethylene, Linear Low Density, Polyethylene Linear Low Density, LLDPE, Polyethylene, PE, Qenos, PolyethyleneLinearLowDensity, 201LDD, 201UltraLDD
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.