IDES Prospector Already have an account? Login Here

IDES

Alkathene™ Ultra LDJ226

Linear Low Density Polyethylene

Supplied by Qenos Pty Ltd

The technical datasheet with complete property values for Alkathene™ Ultra LDJ226 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
LDJ226 is a low density polyethylene designed predominantly for use in bundle shrink film and a variety of low gauge (20 - 50µm) general purpose applications where a medium slip film is required. LDJ226 is formulated with a process stabilisation and antiblock package and contains antistatic additives.

LDJ226 is intended for use in a wide range of shrink and general purpose film applications typically of the thickness 20 to 50µm.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Additive 
  • Antiblock
  • Antistatic
  • Processing Stabilizer
Features 
  • Antiblocking
  • Antistatic
  • General Purpose
  • Medium Slip
  
Uses 
  • Film
  • Shrink Wrap
  
Agency Ratings 
 
Forms 
  • Pellets
Processing Method 
  • Film Extrusion
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Secant Modulus
     ASTM D882
2% Secant, MD: 1.3 mil, Blown Film
psi
  
2% Secant, TD: 1.3 mil, Blown Film
psi
  
Tensile Strength
     ASTM D882
MD: Yield, 1.3 mil, Blown Film
psi
  
TD: Yield, 1.3 mil, Blown Film
psi
  
MD: Break, 1.3 mil, Blown Film
psi
  
TD: Break, 1.3 mil, Blown Film
psi
  
Tensile Elongation
     ASTM D882
MD: Break, 1.3 mil, Blown Film
%
  
TD: Break, 1.3 mil, Blown Film
%
  
Dart Drop Impact (1.3 mil, Blown Film)
g
 ASTM D1709
Elmendorf Tear Strength
     ASTM D1922
MD: 1.3 mil, Blown Film
g
  
TD: 1.3 mil, Blown Film
g
  
Optical
Nominal Value
Unit
Test Method
Gloss (45°, 1.26 mil, Blown Film)
 
 ASTM D2457
Haze (1.26 mil, Blown Film)
%
 ASTM D1003
Additional Information
Film properties taken from blown film processed at a blow up ratio of 2:1.
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Alkathene™ Ultra LDJ226, Alkathene Ultra LDJ226, Alkathene™ Ultra , Alkathene Ultra, AlkatheneUltraLDJ226, AlkatheneUltra, UltraLDJ 226, UltraLDJ226, Ultra, LDJ 226, LDJ226, Polyethylene, Linear Low Density, Polyethylene Linear Low Density, LLDPE, Polyethylene, PE, Qenos, PolyethyleneLinearLowDensity, 226LDJ, 226UltraLDJ
Features
Features may also be described by the following terms: Antiblocking, Unspecified Antiblock, Medium Slip.
Uses
Uses may also be described by the following terms: Shrink Wrap.
Agency Ratings
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1), AS (1).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.