IDES Prospector Already have an account? Login Here

IDES

Alkatuff® LL705UV

Linear Low Density Polyethylene

Supplied by Qenos Pty Ltd

The technical datasheet with complete property values for Alkatuff® LL705UV is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Alkatuff LL705UV is a hexene LLDPE material specifically designed for rotational moulding applications that require excellent ESCR, chemical resistance, stiffness and toughness. Alkatuff LL705UV is UV stabilised to provide prolonged outdoor protection in Australian conditions.

Alkatuff LL705UV is a general purpose rotational moulding grade, uses of which include water and agricultural tanks, leisure craft, canoes and playground equipment.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Additive 
  • UV Stabilizer
Features 
  • Food Contact Acceptable
  • General Purpose
  • Good Chemical Resistance
  • Good Stiffness
  • Good Toughness
  • Hexene Comonomer
  • High ESCR (Stress Crack Resist.)
Uses 
  • Agricultural Applications
  • Agricultural Tanks
  • Sporting Goods
Agency Ratings 
 
Forms 
  • Pellets
Processing Method 
  • Rotational Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Environmental Stress-Cracking Resistance (100% Igepal, F50)
hr
 ASTM D1693A
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Yield)
psi
 ASTM D638
Flexural Modulus - 1% Secant
psi
 ASTM D790
Hydrostatic Design Basis
psi
 ASTM D2837
Thermal
Nominal Value
Unit
Test Method
Peak Melting Temperature
°F
 ASTM D3418
Thermal Stability
 
 AS/NZS 4766
Additional Information
Nominal Value
Unit
Test Method
Contact with Drinking Water
 
 AS/NZS 4020
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Alkatuff® LL705UV, Alkatuff LL705UV, Alkatuff® , Alkatuff, AlkatuffLL705UV, LL 705 UV, LL705UV, LL705, 705UV, Polyethylene, Linear Low Density, Polyethylene Linear Low Density, LLDPE, Polyethylene, PE, Qenos, PolyethyleneLinearLowDensity, 705LL
Features
Features may also be described by the following terms: Good Chemical Resistance, Chemical Resistant, Good Toughness, Tough, Good Stiffness, High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant, Hexene Comonomer.
Uses
Uses may also be described by the following terms: Agricultural Tanks.
Agency Ratings
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1), AS (1).
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.