Alkatuff® 710UV Qenos Polyethylene, Linear Low Density

Product Description

710UV is a linear low density polyethylene specifically designed for rotational moulding and high speed extrusion processes. It has good ESCR, high chemical resistance and toughness. It contains a high level of UV stabiliser to give protection for outdoor use.

710UV is a high flow rotational moulding grade that is best suited to intricate items and low cycle times.

710UV is suitable for food contact applications and conforms to the requirements of the Food and Drug Administration Regulations of USA, (CFR21) Part 177.1520, paragraph (c), sub section 3.1 under conditions described in Part 178.2010 (for volumes greater than 18.9 litres and at temperatures below 65°C).

General

Material Status

Commercial: Active

Availability

Asia Pacific

Additive

UV Stabilizer

Features

Good Chemical Resistance

Good Stiffness

Good Toughness

High ESCR (Stress Crack Resist.)

Uses

Outdoor Applications

Agency Ratings

Forms

Pellets

Processing Method

Rotational Molding

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)		g/10 min	ASTM D1238
Environmental Stress-Cracking Resistance (100% Antarox CO-630, F50)		hr	ASTM D1693
Mechanical	Nominal Value	Unit	Test Method
Tensile Strength²			ASTM D638
Yield		psi
Break		psi
Tensile Elongation² (Break)		%	ASTM D638
Flexural Modulus		psi	ASTM D790
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (-40°F)		ft·lb/in	ASTM D256
Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D)			ASTM D2240
Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load			ASTM D648
66 psi, Unannealed		°F
264 psi, Unannealed		°F
Vicat Softening Temperature		°F	ASTM D1525
Additional Information
Instrumented Puncture, Qenos Method, 23°C: 9.4J
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Alkatuff® 710UV, Alkatuff 710UV, Alkatuff® , Alkatuff, Alkatuff710UV, 710 UV, 710UV, Polyethylene, Linear Low Density, Polyethylene Linear Low Density, LLDPE, Polyethylene, PE, Qenos, PolyethyleneLinearLowDensity, UV710
Features
Features may also be described by the following terms: Good Chemical Resistance, Chemical Resistant, Good Toughness, Tough, Good Stiffness, High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).

Notes

¹Typical properties: these are not to be construed as specifications.

²20 in/min

Alkatuff® 710UV

Linear Low Density Polyethylene

Supplied by Qenos Pty Ltd