IDES Prospector Already have an account? Login Here

IDES

Qenos PE HD115

High Density (HMW) Polyethylene

Supplied by Qenos Pty Ltd

The technical datasheet with complete property values for Qenos PE HD115 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
HD1155 is a very high molecular weight High Density Polyethylene copolymer resin, especially formulated for use in large part mouldings where strength and rigidity are of importance. It combines excellent impact strength with extremely high ESCR.

HD1155 is especially suited for blow moulding self-supporting drums and tanks, size range 25 - 220 litres. Including automotive and marine fuel tanks, and industrial containers. HD1155 is also suitable for Dangerous Goods (DG) applications - depending on the design of the container, the goods to be stored and the DG grouping. Suitability for use in any application should be determined by appropriate performance testing.

HD1155 is suitable for food contact applications and conforms to the requirements of the United States Food and Drug Administration CFR 21 177.1520, paragraph (c) item 3.1.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Features 
  • Copolymer
  • Food Contact Acceptable
  • Good Impact Resistance
  • Good Strength
  • High ESCR (Stress Crack Resist.)
  • High Molecular Weight
  • Medium Rigidity
Uses 
  • Automotive Applications
  • Containers
  • Fuel Tanks
  • Industrial Applications
  
Agency Ratings 
Forms 
  • Pellets
Processing Method 
  • Blow Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR)
     ASTM D1238
190°C/2.16 kg
g/10 min
  
190°C/21.6 kg
g/10 min
  
190°C/5.0 kg
g/10 min
  
Environmental Stress-Cracking Resistance (F50)
hr
 ASTM D1693
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus - Secant
psi
 ASTM D638
Tensile Strength
     ASTM D638
Yield
psi
  
Break
psi
  
Tensile Elongation (Break)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Qenos PE HD115, Qenos PE , QenosPEHD115, QenosPE, PEHD 115, PEHD115, PE, HD 115, HD115, Polyethylene, High Density, Polyethylene High Density, Polyethylene, High Density (HMW), Polyethylene High Density HMW, HDPE, HMW, HDPE HMW, Polyethylene, Qenos, PolyethyleneHighDensityHMW, HDPEHMW, 115HD, 115PEHD
Features
Features may also be described by the following terms: Good Strength, Medium Rigidity, Good Rigidity, Good Impact Resistance, High Molecular Weight, High MW, High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant.
Uses
Uses may also be described by the following terms: Fuel Tanks, Automotive Applications, Automotive Sector.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.