IDES Prospector Already have an account? Login Here

IDES

Qenos PE GM7655

High Density (HMW) Polyethylene

Supplied by Qenos Pty Ltd

The technical datasheet with complete property values for Qenos PE GM7655 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
GM7655 is a high molecular weight extrusion blow moulding grade of High Density Polyethylene with extremely good ESCR.

GM7655 is used for the production of small to medium blown containers and for the production of sheet and thermoformed containers. Suitability for use in any application should be determined by appropriate performance testing.

GM7655 is suitable for food contact applications and conforms to the requirements of the United States Food and Drug Administration CFR 21 177.1520, paragraph (c) item 3.1.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Features 
  • Food Contact Acceptable
  • High ESCR (Stress Crack Resist.)
  • High Molecular Weight
Uses 
  • Containers
  • Sheet
  • Thermoformed Containers
Agency Ratings 
Forms 
  • Pellets
Processing Method 
  • Extrusion Blow Molding
  • Sheet Extrusion
  • Thermoforming
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR)
     ASTM D1238
190°C/2.16 kg
g/10 min
  
190°C/5.0 kg
g/10 min
  
Environmental Stress-Cracking Resistance
hr
 ASTM D1693B
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (-22°F)
ft·lb/in
 ASTM D256A
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Qenos PE GM7655, Qenos PE , QenosPEGM7655, QenosPE, PEGM 7655, PEGM7655, PE, GM 7655, GM7655, Polyethylene, High Density, Polyethylene High Density, Polyethylene, High Density (HMW), Polyethylene High Density HMW, HDPE, HMW, HDPE HMW, Polyethylene, Qenos, PolyethyleneHighDensityHMW, HDPEHMW, 7655GM, 7655PEGM
Features
Features may also be described by the following terms: High Molecular Weight, High MW, High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant.
Uses
Uses may also be described by the following terms: Thermoformed Containers, Thermoformed Container.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.