IDES Prospector Already have an account? Login Here

IDES

Qenos PE HD2845

High Density (MMW) Polyethylene

Supplied by Qenos Pty Ltd

The technical datasheet with complete property values for Qenos PE HD2845 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
HD2845 is a medium molecular weight High Density Polyethylene copolymer blow moulding resin, suited for use in applications where ESCR is a major requirement.

HD2845 may be used in household & industrial chemical (HIC) containers such as detergent and bleach bottles. HD2845 is also suitable for Dangerous Goods (DG) applications - depending on the design of the container, the goods to be stored and the DG grouping. Suitability for use in any application should be determined by appropriate performance testing.

HD2845 is suitable for food contact applications and conforms to the requirements of the United States Food and Drug Administration CFR 21 177.1520, paragraph (c) item 3.1.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Features 
  • Copolymer
  • Food Contact Acceptable
  • High ESCR (Stress Crack Resist.)
  • Medium Molecular Weight
  
Uses 
  • Containers
  • Industrial Containers
  
Agency Ratings 
Forms 
  • Pellets
Processing Method 
  • Blow Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR)
     ASTM D1238
190°C/2.16 kg
g/10 min
  
190°C/21.6 kg
g/10 min
  
190°C/5.0 kg
g/10 min
  
Environmental Stress-Cracking Resistance (F50)
hr
 ASTM D1693
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus - Secant
psi
 ASTM D638
Tensile Strength
     ASTM D638
Yield
psi
  
Break
psi
  
Tensile Elongation (Break)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Qenos PE HD2845, Qenos PE , QenosPEHD2845, QenosPE, PEHD 2845, PEHD2845, PE, HD 2845, HD2845, Polyethylene, High Density, Polyethylene High Density, Polyethylene, High Density (MMW), Polyethylene High Density MMW, HDPE, MMW, HDPE MMW, Polyethylene, Qenos, PolyethyleneHighDensityMMW, HDPEMMW, 2845HD, 2845PEHD
Features
Features may also be described by the following terms: Medium Molecular Weight, Medium MW, High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant.
Uses
Uses may also be described by the following terms: Industrial Containers, Industrial Containers.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.