Qenos PE HD0811 Qenos Polyethylene, High Density (HMW)

Product Description

HD0811 is a high molecular weight, High Density Polyethylene grade.

HD0811 is particularly suitable for the production of thin films with very high impact strength and tear resistance and excellent sealing characteristics. It is also very suitable for the production of high strength monofilament for use in knitted cloth and other applications. Suitability for use in any application should be determined by appropriate performance testing.

HD0811 is suitable for food contact applications and conforms to the requirements of the United States Food and Drug Administration CFR 21 177.1520, paragraph (c) item 3.1.

General

Material Status

Commercial: Active

Availability

Asia Pacific

Additive

Medium Slip

Features

Food Contact Acceptable

Good Tear Strength

High Impact Resistance

High Molecular Weight

Medium Slip

Uses

Film

Monofilaments

Textile Applications

Agency Ratings

Forms

Pellets

Processing Method

Film Extrusion

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)		g/10 min	ASTM D1238
Films	Nominal Value	Unit	Test Method
Film Thickness - Tested		mil
Tensile Strength			ASTM D882
MD: Yield, 0.79 mil		psi
TD: Yield, 0.79 mil		psi
Additional Information
Slip, AS 1326: Medium Block Resistance, Based on ASTM D1839: High Dart Impact, AS 1326, F50, 660 mm: 160g Haze, AS 1326: 80% Gloss, AS 1326: 10 GGU Film properties taken from blown film processed at a blow up ratio of 3.25:1.
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Qenos PE HD0811, Qenos PE , QenosPEHD0811, QenosPE, PEHD 0811, PEHD0811, PE, HD 0811, HD0811, Polyethylene, High Density, Polyethylene High Density, Polyethylene, High Density (HMW), Polyethylene High Density HMW, HDPE, HMW, HDPE HMW, Polyethylene, Qenos, PolyethyleneHighDensityHMW, HDPEHMW, 0811HD, 0811PEHD
Features
Features may also be described by the following terms: Good Tear Strength, Medium Slip, High Impact Resistance, High Molecular Weight, High MW.
Uses
Uses may also be described by the following terms: Monofilaments, Monofilament.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).

Notes

¹Typical properties: these are not to be construed as specifications.

Qenos PE HD0811

High Density (HMW) Polyethylene

Supplied by Qenos Pty Ltd