IDES Prospector Already have an account? Login Here

IDES

Qenos PE GM4755F

High Density (HMW) Polyethylene

Supplied by Qenos Pty Ltd

The technical datasheet with complete property values for Qenos PE GM4755F is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
GM4755F is a high molecular weight High Density Polyethylene.

GM4755F is intended for the production of blown film of greater than 10µm in thickness. Typical applications include carry bags and liners. Suitability for use in any application should be determined by appropriate performance testing.

GM4755F is suitable for food contact applications and conforms to the requirements of the United States Food and Drug Administration CFR 21 177.1520, paragraph (c) item 3.1.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Features 
  • Food Contact Acceptable
Uses 
  • Bags
  • Film
  • Liners
Agency Ratings 
Forms 
  • Pellets
Processing Method 
  • Film Extrusion
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR)
     ASTM D1238
190°C/2.16 kg
g/10 min
  
190°C/5.0 kg
g/10 min
  
Mechanical
Nominal Value
Unit
Test Method
Flexural Modulus
psi
 ASTM D790
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Tensile Strength - MD (Yield, 0.59 mil)
psi
 ASTM D882
Dart Drop Impact (0.59 mil)
g
 ASTM D1709
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Qenos PE GM4755F, Qenos PE , QenosPEGM4755F, QenosPE, PEGM 4755 F, PEGM4755F, PEGM4755, PE, GM 4755 F, GM4755F, GM4755, 4755F, Polyethylene, High Density, Polyethylene High Density, Polyethylene, High Density (HMW), Polyethylene High Density HMW, HDPE, HMW, HDPE HMW, Polyethylene, Qenos, PolyethyleneHighDensityHMW, HDPEHMW, 4755GM, 4755PEGM
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.