IDES Prospector Already have an account? Login Here

IDES

Qenos PE HD0499UV

High Density Polyethylene

Supplied by Qenos Pty Ltd

The technical datasheet with complete property values for Qenos PE HD0499UV is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
HD0499UV is a highly UV stabilised injection moulding grade of High Density Polyethylene combining excellent impact resistance with high hardness, stiffness and toughness.

HD0499UV is especially designed for the production of mouldings demanding the combination of food contact suitability, very good mechanical properties and a high level of UV stabiliser to give protection for outdoor use. Suitability for use in any application should be determined by appropriate performance testing.

HD0499UV is suitable for food contact applications and conforms to the requirements of the United States Food and Drug Administration CFR 21 177.1520, paragraph (c) item 3.1.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Additive 
  • UV Stabilizer
Features 
  • Food Contact Acceptable
  • Good Impact Resistance
  • High Hardness
  • High Stiffness
  • Ultra High Toughness
Uses 
  • Outdoor Applications
Agency Ratings 
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (-22°F)
ft·lb/in
 ASTM D256A
Hardness
Nominal Value
Unit
Test Method
Ball Indentation Hardness
psi
 ISO 2039-1
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Qenos PE HD0499UV, Qenos PE , QenosPEHD0499UV, QenosPE, PEHD 0499 UV, PEHD0499UV, PEHD0499, PE, HD 0499 UV, HD0499UV, HD0499, 0499UV, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, Qenos, PolyethyleneHighDensity, 0499HD, 0499PEHD
Features
Features may also be described by the following terms: Ultra High Toughness, High Stiffness, High Hardness, Hard, Good Impact Resistance.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.