IDES Prospector Already have an account? Login Here

IDES

Qenos PP PPK 2032

Polypropylene Copolymer

Supplied by Qenos Pty Ltd

The technical datasheet with complete property values for Qenos PP PPK 2032 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
PPK 2032 is a low flow, excellent impact and toughness grade of Polypropylene copolymer.

PPK 2032 is intended for use where good physical properties are required in areas such as blown containers, thermoformed sheet, produce crates and automotive applications. Suitability for use in any application should be determined by appropriate performance testing.

PPK 2032 is suitable for food contact applications and conforms to the requirements of AS2070-1999, Plastics Materials for Food Contact Use.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Features 
  • Copolymer
  • Food Contact Acceptable
  • Good Impact Resistance
  • Low Flow
  
Uses 
  • Automotive Applications
  • Containers
  • Crates
  • Sheet
  
Agency Ratings 
Forms 
  • Pellets
Processing Method 
  • Blow Molding
  • Extrusion
  • Injection Molding
  • Thermoforming
  
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR)
     ASTM D1238
230°C/2.16 kg
g/10 min
  
230°C/5.0 kg
g/10 min
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
     ASTM D256A
-22°F
ft·lb/in
  
73°F
ft·lb/in
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Qenos PP PPK 2032, Qenos PP , QenosPPPPK2032, QenosPP, PPPPK 2032, PP, PPPPK2032, PPK 2032, PPK2032, Polypropylene Copolymer, PP Copolymer, Polypropylene, Qenos, PolypropyleneCopolymer, PPCopolymer, 2032PPK, 2032PPPPK
Features
Features may also be described by the following terms: Good Impact Resistance, Low Flow, Low Melt, Low MFI.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): AS (1).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.