IDES Prospector Already have an account? Login Here

IDES

Qenos PP PPK 4132

Polypropylene Copolymer

Supplied by Qenos Pty Ltd

The technical datasheet with complete property values for Qenos PP PPK 4132 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
PPK 4132 is a high heat stabilised, low flow grade of Polypropylene copolymer exhibiting excellent toughness.

PPK 4132 is intended for high heat situations in both automotive and domestic white good applications. The heat ageing resistance of PPK 4132 is greater than 1000 hours when tested at 150 o C in an air circulating oven. Suitability for use in any application should be determined by appropriate performance testing.

PPK 4132 is suitable for food contact applications and conforms to the requirements of AS2070-1999, Plastics Materials for Food Contact Use.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Additive 
  • Heat Stabilizer
Features 
  • Copolymer
  • Food Contact Acceptable
  • Good Toughness
  • Heat Stabilized
  • Low Flow
Uses 
  • Automotive Applications
Agency Ratings 
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR)
     ASTM D1238
230°C/2.16 kg
g/10 min
  
230°C/5.0 kg
g/10 min
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
     ASTM D256A
-22°F
ft·lb/in
  
73°F
ft·lb/in
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Qenos PP PPK 4132, Qenos PP , QenosPPPPK4132, QenosPP, PPPPK 4132, PP, PPPPK4132, PPK 4132, PPK4132, Polypropylene Copolymer, PP Copolymer, Polypropylene, Qenos, PolypropyleneCopolymer, PPCopolymer, 4132PPK, 4132PPPPK
Features
Features may also be described by the following terms: Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized, Good Toughness, Tough, Low Flow, Low Melt, Low MFI.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): AS (1).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.