|
Specific Gravity
|
|
|
|
|
--
|
|
|
ASTM D792 |
|
--
|
|
g/cm³
|
ISO 1183 |
|
Tensile Stress - Across Flow (100% Strain, 73°F)
|
|
psi
|
ASTM D412, ISO 37 |
|
Tensile Strength - Across Flow (Break, 73°F)
|
|
psi
|
ASTM D412, ISO 37 |
|
Tensile Elongation - Across Flow (Break, 73°F)
|
|
%
|
ASTM D412, ISO 37 |
|
Tear Strength - Across Flow
|
|
|
|
|
73°F 2
|
|
lbf/in
|
ASTM D624 |
|
73°F 3
|
|
lbf/in
|
ISO 34-1 |
|
Compression Set
|
|
|
|
|
158°F, 22.0 hr 4
|
|
%
|
ASTM D395B |
|
257°F, 70.0 hr 4
|
|
%
|
ASTM D395B |
|
158°F, 22.0 hr 5
|
|
%
|
ISO 815 |
|
257°F, 70.0 hr 5
|
|
%
|
ISO 815 |
|
Shore Hardness (Shore A, 15 sec, 73°F, 0.0787 in)
|
|
|
ISO 868 |
|
Brittleness Temperature
|
|
°F
|
ASTM D746, ISO 812 |
|
Change in Tensile Strength in Air (302°F, 168 hr)
|
|
%
|
ASTM D573, ISO 188 |
|
Change in Ultimate Elongation in Air (302°F, 168 hr)
|
|
%
|
ASTM D573, ISO 188 |
|
Change in Durometer Hardness in Air (Shore A, 302°F, 168 hr)
|
|
|
ASTM D573, ISO 188 |
|
Flame Rating - UL (0.0433 in)
|
|
|
UL 94 |
|
UL File Number
|
|
|
|
|
Values are for injection molded plaques, fan-gated, 102.0 mm x 152.0 mm x 2.0 mm (4.000" x 6.000" x 0.080").
Tensile strength, elongation and tensile stress are measured across the flow direction - ISO type 1, ASTM die C.
Compression set at 25% deflection.
Tear strength - DIN 53515, die C (notched).
|
|
For detailed Product Stewardship information, please contact Customer Service.
This product, including the product name, shall not be used or tested in any medical application without the prior written acknowledgement of ExxonMobil Chemical as to the intended use.
|
|
This supplier and product may also be known by these terms: Exxon, Exxon Mobil, Exxon Mobile, Advanced Elastomer Systems, AES, Santroprene
Product names can be difficult to match. You may have searched any one of these terms to find this product: Santoprene™ 121-85M100, Santoprene 12185M100, Santoprene™ , Santoprene, Santoprene12185M100, 121, 121 85 M 100, 121-85M100, 12185M100, 121:85M100, 121/85M100, 121+85M100, 121_85M100, 121 85M100, 12185, 85M, M100, Thermoplastic Vulcanizate, TPV, Thermoplastic Elastomer, TPE, ExxonMobil, ThermoplasticVulcanizate, ThermoplasticElastomer, 85121
|
|
Features may also be described by the following terms: Good Chemical Resistance, Chemical Resistant, Good Dimensional Stability, Dimensionally Stable, High Flow, High Melt, High MFI, Good Moldability, Good Surface Finish, Good UV Resistance, UV Resistant, Ultraviolet Resistant, Ultraviolet Light Resistant.
|
|
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.
|
|
This plastic material has approval for 2 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): CHRYSLER (1), GM (1).
|
|
This plastic material has 3 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EU (1), UL (2).
|