IDES Prospector Already have an account? Login Here

IDES

Halene L 71601S

Linear Low Density Polyethylene

Supplied by Haldia Petrochemicals Ltd.

The technical datasheet with complete property values for Halene L 71601S is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
71601S is a LLDPE blown film grade produced by Spherilene Technology with controlled morphology, excellent processability and mechanical properties.

71601S is additivated with slip and antiblocking agent for good openability and slip properties. This grade can be used in General Purpose Packaging Film Applications and drip laterals.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Additive 
  • Antiblock
  • Slip
  
Features 
  • Antiblocking
  • Good Processability
  • Slip
Uses 
  • Film
  • General Purpose
  • Packaging
Forms 
  • Pellets
Processing Method 
  • Blown Film
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Tensile Strength
     ASTM D882
MD: Yield
psi
  
TD: Yield
psi
  
MD: Break
psi
  
TD: Break
psi
  
Tensile Elongation
     ASTM D882
MD: Break
%
  
TD: Break
%
  
Dart Drop Impact 2
g
 ASTM D1709
Elmendorf Tear Strength
     ASTM D1922
MD
g
  
TD
g
  
Optical
Nominal Value
Unit
Test Method
Gloss (60°)
 
 ASTM D2457
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Halene L 71601S, Halene L , HaleneL71601S, HaleneL, L 71601 S, L71601S, L71601, 71601 S, 71601S, Polyethylene, Linear Low Density, Polyethylene Linear Low Density, LLDPE, Polyethylene, PE, Haldia Petrochem, PolyethyleneLinearLowDensity, S71601, 71601L
Features
Features may also be described by the following terms: Antiblocking, Unspecified Antiblock, Good Processability, Easy Processing, Slip, Unspecified Slip.
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Cylinder Zone 5 Temp.
°F
  
Melt Temperature
°F
  
Extrusion Notes
Blow up Ratio: 2.0-3.0
Die Gap: 2.0-2.5mm
Notes
1Typical properties: these are not to be construed as specifications.
238 mm Dart, 66-cm Height, F50
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.