IDES Prospector Already have an account? Login Here

IDES

Halene P F103

Polypropylene Homopolymer

Supplied by Haldia Petrochemicals Ltd.

The technical datasheet with complete property values for Halene P F103 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
F103 is a Polypropylene Homopolymer, produced by the latest generation Spheripol Technology. This is an Extrusion grade primarily suitable for Monolayer or Coextruded Biaxially Oriented Polypropylene films (BOPP).

F103 is designed to provide a very stable extrusion on stenter lines & to give low water carryover, excellent thickness control & increased drawability.

BOPP films produced from F103 possess excellent Clarity, Gloss, Mechanical Strengths, high Impact & Puncture Resistance & barrier to Moisture, Aroma, Fats & Oils. Product produced from F103 is suitable for Food Contact application.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Features 
  • Barrier Resin
  • Flavor & Aroma Barrier
  • Food Contact Acceptable
  • Good Drawdown
  • Good Strength
  • High Clarity
  • High Gloss
  • High Impact Resistance
  • Homopolymer
  • Low Water Carryover
  • Moisture Barrier
  • Oil Resistant
  • Puncture Resistant
Uses 
  • Bi-axially Oriented Film
  • Film
  • General Purpose
  • Laminates
  
Appearance 
  • Clear/Transparent
Forms 
  • Pellets
Processing Method 
  • Extrusion
Physical
Nominal Value
Unit
Test Method
Density 2
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 3, 4 (Yield, Injection Molded)
psi
 ASTM D638
Tensile Elongation 3, 4 (Yield, Injection Molded)
%
 ASTM D638
Flexural Modulus (Injection Molded)
psi
 ASTM D790A
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, Injection Molded)
ft·lb/in
 ASTM D256A
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (66 psi, Unannealed)
°F
 ASTM D648
Vicat Softening Temperature
°F
 ASTM D1525 5
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Halene P F103, Halene P , HalenePF103, HaleneP, PF 103, PF103, F 103, F103, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, Haldia Petrochem, PolypropyleneHomopolymer, PPHomopolymer, 103F, 103PF
Features
Features may also be described by the following terms: High Clarity, High Gloss, High Impact Resistance, Good Puncture Resistance, Puncture Resistant, Good Strength, Flavor & Aroma Barrier, Flavor Barrier, Aroma Barrier, Flavor and Aroma Barrier, Moisture Barrier, Good Drawdown, Good draw down, Low Water Carryover.
Uses
Uses may also be described by the following terms: Bi-axially Oriented Film, Biaxially Oriented Film.
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Cylinder Zone 5 Temp.
°F
  
Extrusion Notes
Water Bath Temperature: 10 to15°C
Notes
1Typical properties: these are not to be construed as specifications.
223°C
3Type I, 2.0 in/min
4with Extensometer
5Loading 1 (10 N)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.