IDES Prospector Already have an account? Login Here

IDES

Halene P M103

Polypropylene Homopolymer

Supplied by Haldia Petrochemicals Ltd.

The technical datasheet with complete property values for Halene P M103 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
M103 is a Polypropylene Homopolymer, produced by the latest generation Spheripol Technology. This homopolymer is primarily suitable for Injection Molding Process. M103 combines easy processability with high Strength.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Features 
  • Good Processability
  • High Strength
  • Homopolymer
Uses 
  • General Purpose
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density 2
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 3, 4 (Yield, Injection Molded)
psi
 ASTM D638
Tensile Elongation 3, 4 (Yield, Injection Molded)
%
 ASTM D638
Flexural Modulus (Injection Molded)
psi
 ASTM D790A
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, Injection Molded)
ft·lb/in
 ASTM D256A
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (66 psi, Unannealed)
°F
 ASTM D648
Vicat Softening Temperature
°F
 ASTM D1525 5
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Halene P M103, Halene P , HalenePM103, HaleneP, PM 103, PM103, M 103, M103, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, Haldia Petrochem, PolypropyleneHomopolymer, PPHomopolymer, 103M, 103PM
Features
Features may also be described by the following terms: Good Processability, Easy Processing, High Strength.
Injection
Nominal Value
Unit
 
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
223°C
3Type I, 2.0 in/min
4with Extensometer
5Loading 1 (10 N)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.