IDES Prospector Already have an account? Login Here

IDES

Duron PPE/PA 820

Polyamide + PPE

Glass Fiber Reinforcement, 20%

Supplied by Pro Polymers

The technical datasheet with complete property values for Duron PPE/PA 820 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Duron PPE/PA 820 is a 20% glass reinforced polyamide that is reinforced with a modified polyphenylene ether polymer. This combination provides improved dimensional stability and heat resistance compared to conventional nylon. It is lubricated which improves mold release and surface finish. Duron PA provides outstanding processability and chemical resistance.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 20% Filler by Weight
Additive 
  • Lubricant
Features 
  • Good Chemical Resistance
  • Good Dimensional Stability
  • Good Mold Release
  • Good Processability
  • Good Surface Finish
  • Lubricated
  • Medium Heat Resistance
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Molding Shrinkage
     ASTM D955
Flow: 0.125 in
in/in
  
Across Flow: 0.125 in
in/in
  
Water Absorption (24 hr)
%
 ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield, 73°F)
psi
 ASTM D638
Tensile Elongation (Break, 73°F)
%
 ASTM D638
Flexural Modulus (73°F)
psi
 ASTM D790
Flexural Strength (73°F)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F)
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Unannealed
°F
  
264 psi, Unannealed
°F
  
Melting Temperature
°F
  
CLTE - Flow
in/in/°F
 ASTM D696
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Duron PPE/PA 820, Duron PPEPA 820, Duron , DuronPPEPA820, PPE, PPE/PA 820, PPEPA 820, PPE:PA 820, PPE+PA 820, PPE-PA 820, PPE_PA 820, PPE PA 820, PPEPA, PA820, PPEPA820, PPE_PA820, Polyamide + PPE, Polyamide PPE, Polyamide : PPE, Polyamide / PPE, Polyamide - PPE, Polyamide _ PPE, Polyamide PPE, Nylon+PPE, NylonPPE, Nylon:PPE, Nylon/PPE, Nylon-PPE, Nylon_PPE, Nylon PPE, Polyamide, Nylon, Pro Polymers, PolyamidePPE, Polyamide_PPE, PAPPE
Features
Features may also be described by the following terms: Good Dimensional Stability, Dimensionally Stable, Medium Heat Resistance, Good Mold Release, Easy Release, Good Demolding, Good Surface Finish, Good Processability, Easy Processing, Good Chemical Resistance, Chemical Resistant.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.