NILAMID A3 H G6 0001 Nilit Polyamide 66 (Glass Fiber Reinforcement, 30%)

General

Material Status

Commercial: Active

Availability

Africa & Middle East

Asia Pacific

Europe

North America

Filler / Reinforcement

Glass Fiber Reinforcement, 30% Filler by Weight

Features

High Flow

Uses

Thin-walled Parts

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Molding Shrinkage			ISO 294-4
Across Flow: 73°F		%
Flow: 73°F		%
Water Absorption			ISO 62
73°F, 24 hr		%
Saturation, 73°F		%
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus (73°F)		psi	ISO 527-2
Tensile Stress (Yield, 73°F)		psi	ISO 527-2
Tensile Strain (Break, 73°F)		%	ISO 527-2
Flexural Modulus			ISO 178
73°F		psi
194°F		psi
Flexural Strength			ISO 178
194°F		psi
73°F		psi
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength			ISO 179
-22°F		ft·lb/in²
73°F		ft·lb/in²
Charpy Unnotched Impact Strength			ISO 179
-22°F		ft·lb/in²
73°F		ft·lb/in²
Notched Izod Impact Strength			ISO 180
-22°F		ft·lb/in²
73°F		ft·lb/in²
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed		°F	ISO 75-2/B
264 psi, Unannealed		°F	ISO 75-2/A
Max. Continuous Use Temperature²		°F	IEC 60216
Vicat Softening Temperature		°F	ISO 306/B
Ball Pressure Test			IEC 60695-10-2
257°F
329°F
Electrical	Nominal Value	Unit	Test Method
Surface Resistivity		ohms	IEC 60093
Volume Resistivity		ohm·cm	IEC 60093
Comparative Tracking Index (0.126 in, Solution A)		V	IEC 60112
Electric Strength (0.0787 in)		V/mil	IEC 60243-1
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL			UL 94
0.0315 in
0.0630 in
0.126 in
Glow Wire Flammability Index			IEC 60695-2-12
0.0315 in		°F
0.126 in		°F
Oxygen Index		%	ISO 4589-2
Flammability³ (39.4 mil)			FMVSS 302
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: NILAMID® A3 H G6 0001, NILAMID A3 H G6 0001, NILAMID® , NILAMID, NILAMIDA3HG60001, A 3 H G 6 0001, A3 H G6 0001, A3, 3H, HG, G6, 60001, A3HG60001, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, Nilit, Polyamide66, Nylon66, 3A
Generic Name
Generic Name may also be described by the following terms: PA66.
Features
Features may also be described by the following terms: High Flow, High Melt, High MFI.
Uses
Uses may also be described by the following terms: Thin-walled Parts, Thin Walled Parts, Thin-wall Parts, Thin wall Parts, Thinwall Parts.

Notes

¹Typical properties: these are not to be construed as specifications.

²20000 hrs

³355x100

NILAMID® A3 H G6 0001

Polyamide 66

Glass Fiber Reinforcement, 30%

Supplied by Nilit Ltd.