IDES Prospector Already have an account? Login Here

IDES

Borcoat™ BB108E-1199

Polypropylene Impact Copolymer

Supplied by Borealis AG

The technical datasheet with complete property values for Borcoat™ BB108E-1199 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Borcoat BB108E-1199, a ready made white compound, is a high molecular weight, low melt flow rate polypropylene block copolymer. As a top-coat in three component polypropylene systems, Borcoat BB108E-1199 fulfils the requirements in NFA 49-711, DIN 30678, Shell specification (DEP 31.40.30.31) and Pr EN10286 when used in combination with Borcoat BB125 or Borcoat BB127E and compatible powder epoxy and applied under sound processing conditions.

Borcoat BB108E-1199 is used in steel pipe coating as a top-coat for three component systems, UV stabilized, highly protected against thermal ageing, and designed for continuous use at high temperatures 110°C on-shore and up to 140°C for very specific off-shore projects.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  • South America
Additive 
  • UV Stabilizer
Features 
  • Block Copolymer
  • High Molecular Weight
  • Low Flow
  • Recyclable Material
  
Uses 
  • Coating Applications
  • Pipe Coatings
  
Agency Ratings 
 
Appearance 
  • White
Forms 
  • Pellets
Processing Method 
  • Extrusion Coating
Physical
Nominal Value
Unit
Test Method
Density
     ISO 1183
-- 2
g/cm³
  
-- 3
g/cm³
  
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Yield)
psi
 ISO 527-2/50
Tensile Strain (Yield)
%
 ISO 527-2/50
Flexural Modulus 4 (Injection Molded)
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-4°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ISO 306/A
Additional Information
Fungia Resistance, ASTM G21: No Growth
Bacteria Resistance, ASTM G21: No Growth
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Borcoat™ BB108E-1199, Borcoat BB108E1199, Borcoat™ , Borcoat, BorcoatBB108E1199, BB 108 E, BB108E, BB 108 E 1199, BB108E-1199, BB108E1199, BB108E:1199, BB108E/1199, BB108E+1199, BB108E_1199, BB108E 1199, BB108, 108E, E1199, Polypropylene Impact Copolymer, PP Impact Copolymer, Polypropylene, PP, Borealis, PolypropyleneImpactCopolymer, PPImpactCopolymer, 108BB
Features
Features may also be described by the following terms: Low Flow, Low Melt, Low MFI, High Molecular Weight, High MW, Block Copolymer.
Uses
Uses may also be described by the following terms: Pipe Coatings, Pipe Coating.
Agency Ratings
This plastic material has 4 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): Shell (1), ISO (1), DIN (1), NF (1).
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Cylinder Zone 5 Temp.
°F
  
Melt Temperature
°F
  
Die Temperature
°F
  
Extrusion Notes
Head Temperature: 210 to 220°C
Notes
1Typical properties: these are not to be construed as specifications.
2Base Resin
3Compound
40.079 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.