IDES Prospector Already have an account? Login Here

IDES

Borcoat™ GA700E-7032

Polypropylene Impact Copolymer

Glass Bead

Supplied by Borealis AG

The technical datasheet with complete property values for Borcoat™ GA700E-7032 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Borcoat GA700E-7032 is a high impact polypropylene compound filled with hollow glass speheres used as a component in thermal insulation coating systems and is grey coloured.

Borcoat GA700E-7032 can be used to make PP multi-layer thermal insulation systems suitable for temperatures up to 140 °C.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  • South America
Filler / Reinforcement 
  • Glass Bead
Features 
  • Impact Copolymer
  • Non-Smooth Surface Finish
  • Recyclable Material
Uses 
  • Coating Applications
  • Pipe Coatings
  
Appearance 
  • Grey
Forms 
  • Pellets
Processing Method 
  • Extrusion Coating
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/2
Tensile Stress (Yield)
psi
 ISO 527-2/50
Tensile Strain (Break)
%
 ISO 527-2/50
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ISO 306/A50
Thermal Conductivity
Btu·in/hr/ft²/°F
 ASTM C177
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Borcoat™ GA700E-7032, Borcoat GA700E7032, Borcoat™ , Borcoat, BorcoatGA700E7032, GA 700 E, GA700E, GA 700 E 7032, GA700E-7032, GA700E7032, GA700E:7032, GA700E/7032, GA700E+7032, GA700E_7032, GA700E 7032, GA700, 700E, E7032, Polypropylene Impact Copolymer, PP Impact Copolymer, Polypropylene, PP, Borealis, PolypropyleneImpactCopolymer, PPImpactCopolymer, 700GA
Features
Features may also be described by the following terms: Impact Copolymer, Non-Smooth Surface Finish.
Uses
Uses may also be described by the following terms: Pipe Coatings, Pipe Coating.
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Cylinder Zone 5 Temp.
°F
  
Melt Temperature
°F
  
Die Temperature
°F
  
Extrusion Notes
Conductor preheating Temperature: 90 to 100°C
Temperature Inlet Zone: 70 to 80°C
Melt Pressure: <50 bar
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.