IDES Prospector Already have an account? Login Here

IDES

Bormod™ HF955MO

High Crystallinity Polypropylene

Supplied by Borealis AG

The technical datasheet with complete property values for Bormod™ HF955MO is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Bormod HF955MO is a very stiff polypropylene homopolymer. This grade combines unique Borstar reactor design with Borstar nucleation technology to produce highly-crystalline polypropylene. This combination also results in unique balance of properties especially suited for high-speed injection moulding.

Products originating from this grade have excellent demoulding properties, very high stiffness, good transparency and gloss and good impact strength at ambient temperatures.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  • South America
Additive 
  • Nucleating Agent
Features 
  • Fast Molding Cycle
  • Good Impact Resistance
  • Good Mold Release
  • High Gloss
  • High Stiffness
  • Highly Crystalline
  • Homopolymer
  • Medium Clarity
  • Nucleated
Uses 
  • Caps
  • Closures
  • Containers
  • Lids
  • Support Trays
  • Thick-walled Parts
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Molding Shrinkage
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/1
Tensile Stress (Yield)
psi
 ISO 527-2/50
Tensile Strain (Yield)
%
 ISO 527-2/50
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eA
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ISO 2039-2
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature 2 (66 psi, Unannealed)
°F
 ISO 75-2/B
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Bormod™ HF955MO, Bormod HF955MO, Bormod™ , Bormod, BormodHF955MO, HF 955 MO, HF955MO, HF955, 955MO, Polypropylene, High Crystallinity, Polypropylene High Crystallinity, PP, High Crystal, PP High Crystal, Polypropylene, PP, Borealis, PolypropyleneHighCrystallinity, PPHighCrystal, 955HF
Features
Features may also be described by the following terms: High Stiffness, Good Mold Release, Easy Release, Good Demolding, Good Impact Resistance, High Gloss, Fast Cycle, Rapid Cycle, Productivity, Fast Molding Cycle, High Crystallinity, Highly Crystalline, Medium Clarity.
Uses
Uses may also be described by the following terms: Support Trays, Thick-walled Parts, Thick Walled Parts, Thick-wall Parts, Thick Wall Parts, Thickwall Parts, Closure Caps, Caps, Cap.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Rate
 
  
Holding Pressure
psi
  
Notes
1Typical properties: these are not to be construed as specifications.
2Injection molded specimen
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.