IDES Prospector Already have an account? Login Here

IDES

Borsoft™ SE319MO

Polypropylene Random Copolymer

Supplied by Borealis AG

The technical datasheet with complete property values for Borsoft™ SE319MO is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Borsoft SE319MO is a specially modified relatively soft and transparent polypropylene random heterophasic copolymer with medium melt flow intended for injection moulding. Borsoft SE319MO is formulated for high speed injection moulding and contains nucleating and mould release additives.

Products moulded from Borsoft SE319MO have unique combination of flexibility, high heat deflection temperature and good contact transparency combined with very low level of stress withening, excellent impact strength, and low warpage or distortion.

Borsoft SE319MO is designed for injection moulded houseware containers and lids requiring flexibility, good contact transparency, and high impact strength.

Examples of products successfully moulded with Borsoft SE319MO are:
  • Houseware containers and lids
  • Soft containers, lids and closures with film hinge
  • Tubes for cosmetic packaging
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  • South America
Additive 
  • Mold Release
  • Nucleating Agent
  
Features 
  • Contact Clarity
  • Good Flexibility
  • Good Mold Release
  • High Impact Resistance
  • Medium Flow
  • Nucleated
  • Random Copolymer
  • Recyclable Material
  • Soft
Uses 
  • Closures
  • Containers
  • Cosmetic Packaging
  • Household Goods
  • Lids
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (Injection Molded)
psi
 ISO 527-2/1
Tensile Stress (Yield, Injection Molded)
psi
 ISO 527-2/50
Tensile Strain (Yield, Injection Molded)
%
 ISO 527-2/50
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-4°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Multi-Axial Instrumented Impact Energy
     ISO 6603-2
-4°F, Injection Molded, Total Penetration Energy
ft·lb
  
32°F, Injection Molded, Total Penetration Energy
ft·lb
  
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D, Injection Molded)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (66 psi, Unannealed)
°F
 ISO 75-2/B
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Borsoft™ SE319MO, Borsoft SE319MO, Borsoft™ , Borsoft, BorsoftSE319MO, SE 319 MO, SE319MO, SE319, 319MO, Polypropylene Random Copolymer, PP Random Copolymer, Polypropylene, PP, Borealis, PolypropyleneRandomCopolymer, PPRandomCopolymer, 319SE
Features
Features may also be described by the following terms: Random Copolymer, Good Mold Release, Easy Release, Good Demolding, Medium Flow, Medium Melt, Medium MFI, High Impact Resistance, Good Flexibility, Flexible, Contact Clarity.
Uses
Uses may also be described by the following terms: Household Goods, Housewares, Cosmetic Packaging.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Rate
 
  
Holding Pressure
psi
  
Injection Notes
Shrinkage is about 1.5% depending on wall thickness and moulding parameters.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.