IDES Prospector Already have an account? Login Here

IDES

Borsoft™ SE410MO

Polypropylene Impact Copolymer

Supplied by Borealis AG

The technical datasheet with complete property values for Borsoft™ SE410MO is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Borsoft SE410MO is a specially modified relatively soft polypropylene heterophasic copolymer with medium melt flow intended for injection moulding.

Products moulded from Borsoft SE410MO have unique combination of flexibility and excellent impact strength combined with relatively good stackability and high heat deflection temperature. Borsoft SE410MO is a CR grade with narrow molecular weight distribution giving low warpage or distortion.

Borsoft SE410MO is formulated for high speed injection moulding, and the grade has nucleating additives and excellent antistatic performance. Electrostatic charge half time decay <2 sec. after 48 hours (Borealis method).

Borsoft SE410MO is a tailor made grade designed for easy production of injection moulded lids requiring flexibility, high impact strength, and normal copolymer shrinkage without loosing too much stackability properties.

Examples of products successfully moulded with Borsoft SE410MO are:
  • Easy-to-open lids for pails
  • Soft containers, lids and closures with film hinge
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  • South America
Additive 
  • Nucleating Agent
Features 
  • Good Flexibility
  • High Impact Resistance
  • Low Warpage
  • Medium Flow
  • Narrow Molecular Weight Distribution
  • Nucleated
Uses 
  • Closures
  • Containers
  • Lids
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (Injection Molded)
psi
 ISO 527-2/1
Tensile Stress (Yield, Injection Molded)
psi
 ISO 527-2/50
Tensile Strain (Yield, Injection Molded)
%
 ISO 527-2/50
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-4°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Multi-Axial Instrumented Impact Energy
     ISO 6603-2
-4°F, Injection Molded, Total Penetration Energy
ft·lb
  
32°F, Injection Molded, Total Penetration Energy
ft·lb
  
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ISO 2039-2
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (66 psi, Unannealed)
°F
 ISO 75-2/B
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Borsoft™ SE410MO, Borsoft SE410MO, Borsoft™ , Borsoft, BorsoftSE410MO, SE 410 MO, SE410MO, SE410, 410MO, Polypropylene Impact Copolymer, PP Impact Copolymer, Polypropylene, PP, Borealis, PolypropyleneImpactCopolymer, PPImpactCopolymer, 410SE
Features
Features may also be described by the following terms: Narrow Molecular Weight Distribution, Narrow MW Distribution, Medium Flow, Medium Melt, Medium MFI, Low Warpage, Low Warp, High Impact Resistance, Good Flexibility, Flexible.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Rate
 
  
Holding Pressure
psi
  
Injection Notes
Shrinkage is about 1.5% depending on wall thickness and moulding parameters.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.