Borstar HE3492-LS Borealis Polyethylene, High Density

Product Description

Borstar HE3492-LS is a yellow-orange, cadmium free, high-density polyethylene classified as a MRS 10.0 material (PE100) produced with the advanced Borstar technology. It includes a combination of pigments and stabilisers to ensure excellent long-term, UV-resistance, and resistance to gas condensate. It also shows excellent resistance to rapid crack propagation and slow crack growth.

Borstar HE3492-LS is recommended for pressure pipe systems in the application field of natural gas and gives good processing properties and low sagging in thick-walled pipes.

General

Material Status

Commercial: Active

Availability

Europe

North America

South America

Additive

UV Stabilizer

Features

Good Processability

Good UV Resistance

Recyclable Material

Uses

Piping

Appearance

Yellow

Forms

Pellets

Processing Method

Extrusion

Pipe Extrusion

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/5.0 kg)		g/10 min	ISO 1133
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus		psi	ISO 527-2/1
Tensile Stress (Yield)		psi	ISO 527-2/50
Additional Information
Density (Base Resin), ISO 1183: 0.950 g/cm³ Density (Compound), ISO 1183: 0.952 g/cm³ Thermal Stability, EN 728, 210°C: >20 min Resistance to Slow Crack Growth, ISO 13479, 9.2 bar, 80°C: >1000 hr Resistance to Rapid Crack Propagation, ISO/DIS 13477, S4 Test, Pc at 0°C, Test pipe 110 x 15 mm: >9 bar
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Borstar® HE3492-LS, Borstar HE3492LS, Borstar® , Borstar, BorstarHE3492LS, HE 3492, HE 3492 LS, HE3492-LS, HE3492LS, HE3492:LS, HE3492/LS, HE3492+LS, HE3492_LS, HE3492 LS, HE3492, 3492LS, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, Borealis, PolyethyleneHighDensity, 3492HE
Features
Features may also be described by the following terms: Good UV Resistance, UV Resistant, Ultraviolet Resistant, Ultraviolet Light Resistant, Good Processability, Easy Processing.
Uses
Uses may also be described by the following terms: Piping, Pipe.

Extrusion	Nominal Value	Unit
Cylinder Zone 1 Temp.		°F
Melt Temperature		°F
Die Temperature		°F
Extrusion Notes
Head Temperature: 200 to 210°C

Notes

¹Typical properties: these are not to be construed as specifications.

Borstar® HE3492-LS

High Density Polyethylene

Supplied by Borealis AG