IDES Prospector Already have an account? Login Here

IDES

Casico™ FR4804

Polyethylene

Unspecified Filler\Reinfor.

Supplied by Borealis AG

The technical datasheet with complete property values for Casico™ FR4804 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Casico FR4804 is a thermoplastic, low smoke zero halogen (LSZH) flame retardant, UV stabilised, natural jacketing compound combining with excellent extrusion properties.

It is based on the novel technology, Casico, containing inorganic filler and a novel char-forming additive which confer flame retardancy with very limited smoke generation.

It can be used in areas sensitive to smoke or corrosive and toxic combustion products.

Casico FR4804 meets the applicable requirements below using sound commercial extrusion practice and testing procedures:
  • BS 7655 LTS2
  • EN 50173
  • EN 50290-2-27
  • EN 50363-8 TM7
  • IEC 60227
  • VDE 0207 Teil 24 (HM2, HM4 & HM5)
  • VDE 0250 Teil 215
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  • South America
Filler / Reinforcement 
  • Unspecified Filler\Reinfor.
Additive 
  • Flame Retardant
  • UV Stabilizer
  
Features 
  • Flame Retardant
  • Good Colorability
  • Good Corrosion Resistance
  • Good Processability
  • Good UV Resistance
  • Halogen Free
  • Low Smoke Emission
  • Low Toxicity
  • Moisture Resistant
Uses 
  • Cable Jacketing
  • Wire & Cable Applications
  
Agency Ratings 
 
Appearance 
  • Natural Color
Forms 
  • Granules
Processing Method 
  • Extrusion
Physical
Nominal Value
Unit
Test Method
Density 2
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) 3 (190°C/2.16 kg)
g/10 min
 ISO 1133
Water Absorption 4 (158°F)
mg/cm²
 IEC 60811-1-3
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress 5, 6 (Yield)
psi
 IEC 60811-1-1
Tensile Strain 6 (Break)
%
 IEC 60811-1-1
Flexural Modulus 3
psi
 ISO 178
Hardness
Nominal Value
Unit
Test Method
Shore Hardness 3 (Shore D, 15 sec)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Cold Bend 6 (-40°F)
 
 IEC 60811-1-4
Cold Impact 6 (-40°F)
 
 IEC 60811-1-4
Aging
Nominal Value
Unit
Test Method
Change in Tensile Stress     IEC 60811-1-2
-- 7
%
  
212°F, 240 hr 6
%
  
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity 3
ohm·cm
 IEC 60093
Electric Strength
V/mil
 IEC 60243-1
Flammability
Nominal Value
Unit
Test Method
Oxygen Index
%
  
NBS Smoke Density     ASTM E662
-- 8
 
  
-- 9
 
  
time to Dmax  9
min
  
time to Dmax  10
min
  
Additional Information
Nominal Value
Unit
Test Method
Breakdown Duration 6
 
 IEC 60227-2/2.3
Breakdown Voltage 6
V
 ISO 6722
Cone Calorimeter     ISO 5660
Average Heat Release  11
kW/m²
  
CO  11
lb/in³
  
CO2  11
lb/in³
  
Heat Combustion  12
 
  
Ingition time  11
min
  
Max Heat Release  11
kW/m²
  
Smoke Obscuration  13
 
  
Corrosion - of Combustion Fumes 14
µS/cm
  
Pressure Test 15 (194°F)
%
 IEC 60811-3-1
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Casico™ FR4804, Casico FR4804, Casico™ , Casico, CasicoFR4804, FR 4804, FR4804, Polyethylene, Unspecified, Polyethylene Unspecified, PE, Unspecified, PE Unspecified, Polyethylene, PE, Borealis, PolyethyleneUnspecified, PEUnspecified, 4804FR
Features
Features may also be described by the following terms: Zero Halogen Content, Halogen Free, Good Colorability, Good Corrosion Resistance, Corrosion Resistant, Moisture Resistant, Water Resistant, Low Moisture Absorption, Low Water Absorption, Good Processability, Easy Processing, Low Smoke Emission, Low Toxicity, Good UV Resistance, UV Resistant, Ultraviolet Resistant, Ultraviolet Light Resistant.
Uses
Uses may also be described by the following terms: Wire and Cable Applications, Wire & Cable Applications.
Agency Ratings
This plastic material has 4 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): BS (1), IEC (1), EN (1), VDE (1).
Extrusion
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Die Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2Compound, ISO 1872-2
3Compound
4Cable (0.7 mm insulation over 1.5 mm² solid Cu), 14 days
52.0 in/min
6Cable (0.7 mm insulation over 1.5 mm² solid Cu)
7After UV ageing
8Non- flaming mode, Optical Smoke Density Dmax, (76x76x0.7 mm plaque)
9Flaming mode, Optical Smoke Density Dmax, (76x76x0.7 mm plaque)
10Non-flaming mode, Optical Smoke Density Dmax, (76x76x0.7 mm plaque)
11heat flux 35 kW/m2, 3 mm plaque
12heat flux 35 kW/m2, 3 mm plaque, MJ/dm3
13heat flux 35 kW/m2, 3 mm plaque, m2/dm3
14Compound, 5.3
15at high temperature, 4 hrs, Cable (0.7 mm insulation over 1.5 mm² solid Cu)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.