IDES Prospector Already have an account? Login Here

IDES

Casico™ FR4807

Polyolefin

Unspecified Filler\Reinfor.

Supplied by Borealis AG

The technical datasheet with complete property values for Casico™ FR4807 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Casico FR4807 is a thermoplastic, low smoke zero halogen (LSZH) flame retardant, UV stabilised, natural jacketing compound combining with excellent extrusion properties.

It is based on the novel technology, Casico, containing inorganic filler and a novel char-forming additive which confer flame retardancy with very limited smoke generation.

It can be used in areas sensitive to smoke or corrosive and toxic combustion products. For most cable constructions, Casico FR4807 has sufficient flame retardancy to satisfy single wire vertical burning tests.

Casico FR4807 meets the applicable requirements below using sound commercial extrusion practice and testing procedures:
  • BS 7655 LTS3
  • EN 50173
  • EN 50290-2-27
  • EN 50363-8 TM7
  • IEC 60227
  • VDE 0207 Teil 24 (HM2)
  • VDE 0250 Teil 215
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  • South America
Filler / Reinforcement 
  • Unspecified Filler\Reinfor.
Additive 
  • Flame Retardant
  • UV Stabilizer
  
Features 
  • Flame Retardant
  • Good Colorability
  • Good Corrosion Resistance
  • Good Processability
  • Halogen Free
  • Low Smoke Emission
  • Low Toxicity
  • Moisture Resistant
Uses 
  • Cable Jacketing
  • Flexible Cord Insulation
  • Flexible Jacketing
  • Wire & Cable Applications
  
Agency Ratings 
 
Appearance 
  • Natural Color
Forms 
  • Granules
Processing Method 
  • Extrusion
Physical
Nominal Value
Unit
Test Method
Density 2
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ISO 1133
Water Absorption 3 (158°F)
mg/cm²
 IEC 60811-1-3
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress 4, 5 (Yield)
psi
 IEC 60811-1-1
Tensile Strain 5 (Break)
%
 IEC 60811-1-1
Flexural Modulus 6
psi
 ISO 178
Hardness
Nominal Value
Unit
Test Method
Shore Hardness 6 (Shore D, 15 sec)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Cold Bend 5 (-40°F)
 
 IEC 60811-1-4
Cold Impact 5 (-40°F)
 
 IEC 60811-1-4
Aging
Nominal Value
Unit
Test Method
Change in Tensile Stress
      
-- 7
%
 ISO 1817
212°F, 240 hr 5
%
 IEC 60811-1-2
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity 6
ohm·cm
 IEC 60093
Electric Strength
V/mil
 IEC 60243-1
Flammability
Nominal Value
Unit
Test Method
Oxygen Index 6
%
  
NBS Smoke Density
     ASTM E662
-- 8
min
  
-- 9
 
  
-- 10
min
  
-- 11
 
  
Additional Information
Nominal Value
Unit
Test Method
Breakdown Duration 5
 
 IEC 60227-2/2.3
Breakdown Voltage 5
V
 ISO 6722
Cone Calorimeter
     ISO 5660
-- 12
lb/ft³
  
Average Heat Release  12
kW/m²
  
CO  12
lb/ft³
  
Heat Combustion  13
 
  
Ignition time  12
min
  
Max Heat Release  12
kW/m²
  
Smoke Obscuration  14
 
  
Corrosion - of Combustion Fumes 15
µS/cm
 IEC 60754-2
Pressure Test 16 (176°F)
%
 IEC 60811-3-1
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Casico™ FR4807, Casico FR4807, Casico™ , Casico, CasicoFR4807, FR 4807, FR4807, Polyolefin, Unspecified, Polyolefin Unspecified, Polyolefin, Borealis, PolyolefinUnspecified, 4807FR
Features
Features may also be described by the following terms: Zero Halogen Content, Halogen Free, Good Corrosion Resistance, Corrosion Resistant, Low Smoke Emission, Low Toxicity, Good Colorability, Moisture Resistant, Water Resistant, Low Moisture Absorption, Low Water Absorption, Good Processability, Easy Processing.
Uses
Uses may also be described by the following terms: Flexible Cord Insulation, Flexible Jacketing, Wire and Cable Applications, Wire & Cable Applications.
Agency Ratings
This plastic material has 4 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): VDE (1), EN (1), BS (1), IEC (1).
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Die Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2Compound, ISO 1872-2
314 days, Cable (0.7 mm insulation over 1.5 mm² solid Cu)
42.0 in/min
5Cable (0.7 mm insulation over 1.5 mm² solid Cu)
6Compound
7After UV ageing, Cable (0.7 mm insulation over 1.5 mm² solid Cu)
8Time to Dmax, (76x76x0.7 mm plaque), Flaming mode
9Optical smoke density Dmax, (76x76x0.7 mm plaque), Flaming mode
10Time to Dmax, (76x76x0.7 mm plaque), Non-flaming mode
11Optical smoke density Dmax, (76x76x0.7 mm plaque), Non-flaming mode
12heat flux 35 kW/m2, 3 mm plaque
13heat flux 35 kW/m2, 3 mm plaque, MJ/dm3
14heat flux 35 kW/m2, 3 mm plaque, m2/dm3
15Compound, 5.3
16at high temperature, 4 hrs, Cable (0.7 mm insulation over 1.5 mm² solid Cu)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.