IDES Prospector Already have an account? Login Here

IDES

Daplen™ ED206HP

Polypropylene

Mineral Filler, 25%

Supplied by Borealis AG

The technical datasheet with complete property values for Daplen™ ED206HP is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
ED206HP is a 25% mineral reinforced compound intended for injection moulding.

ED206HP has been developed especially for the car industry, to be used in interior parts requiring excellent scratch resistance. ED206HP has good processability with optimised physical properties.

ED206HP has an excellent balance between the impact strength and stiffness.

Automotive parts:
  • Dashboards
  • Interior panels
  • Dashboard inserts
  • Door panels and pockets
  • Consoles
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  • South America
Filler / Reinforcement 
  • Mineral Filler, 25% Filler by Weight
Features 
  • Good Impact Resistance
  • Good Stiffness
  • Recyclable Material
  • Scratch Resistant
  
Uses 
  • Automotive Applications
  • Automotive Interior Parts
  
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR)
     ISO 1133
230°C/2.16 kg
g/10 min
  
230°C/5.0 kg
g/10 min
  
Molding Shrinkage
%
 ISO 294-4
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Yield, Injection Molded)
psi
 ISO 527-2/50
Flexural Modulus 2 (Injection Molded)
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-4°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Charpy Unnotched Impact Strength
     ISO 179/1eU
-4°F
ft·lb/in²
  
73°F
 
  
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D, Injection Molded)
 
 ISO 868
Ball Indentation Hardness (H 358/30)
psi
 ISO 2039-1
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ISO 75-2/A
Vicat Softening Temperature
      
--
°F
 ISO 306/A50
--
°F
 ISO 306/B50
Additional Information
The value listed as Molding Shrinkage, ISO 294-4, was tested in accordance with Borealis test methods.
Fogging, DIN 75201, 100°C, 3 hr: 98%
Fogging, DIN 75201, 100°C, 16 hr: 0.4mg
Emission, VDA 277: 24 µg C/g
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Daplen™ ED206HP, Daplen ED206HP, Daplen™ , Daplen, DaplenED206HP, ED 206 HP, ED206HP, ED206, 206HP, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, Borealis, PolypropyleneUnspecified, PPUnspecified, 206ED
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Features
Features may also be described by the following terms: Good Stiffness, Scratch Resistant, Resists Scratches, Good Impact Resistance.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Rate
 
  
Injection Notes
Screw Speed: slow
Notes
1Typical properties: these are not to be construed as specifications.
20.079 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.