Xmod™ PC75 Borealis Polypropylene, High Crystallinity

Product Description

Xmod PC75 is a HCPP intended for injection moulding of automotive interior parts.

Xmod PC75 is a very easy-flowing material combined with a good balance between impact strength and stiffness. The material gives a good surface quality.

Applications:

Pillar trims

Door panels and pockets

Central consoles

General

Material Status

Commercial: Active

Availability

Europe

North America

South America

Features

Good Flow

Good Impact Resistance

Good Stiffness

Good Surface Finish

Recyclable Material

Uses

Automotive Applications

Automotive Interior Parts

Automotive Interior Trim

Appearance

Black

Forms

Pellets

Processing Method

Injection Molding

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR)			ISO 1133
230°C/2.16 kg		g/10 min
230°C/5.0 kg		g/10 min
Molding Shrinkage		%	ISO 294-4
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus		psi	ISO 527-2/1
Tensile Stress (Yield)		psi	ISO 527-2/50
Tensile Strain (Break)		%	ISO 527-2/50
Flexural Modulus²		psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength			ISO 179/1eA
-4°F		ft·lb/in²
73°F		ft·lb/in²
Charpy Unnotched Impact Strength			ISO 179/1eU
-4°F		ft·lb/in²
73°F
Hardness	Nominal Value	Unit	Test Method
Ball Indentation Hardness (H 358/30)		psi	ISO 2039-1
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed		°F	ISO 75-2/B
264 psi, Unannealed		°F	ISO 75-2/A
Vicat Softening Temperature
--		°F	ISO 306/A50
--		°F	ISO 306/B50
Additional Information
The value listed as Molding Shrinkage, ISO 294-4, was tested in accordance with Borealis test methods. Fogging, DIN 75201, 100°C, 3 hr: 92.4 % Fogging, DIN 75201, 100°C, 16 hr: 0.9 mg Emission, VDA 277: 37 µg C/g
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Xmod™ PC75, Xmod PC75, Xmod™ , Xmod, XmodPC75, PC 75, PC75, Polypropylene, High Crystallinity, Polypropylene High Crystallinity, PP, High Crystal, PP High Crystal, Polypropylene, PP, Borealis, PolypropyleneHighCrystallinity, PPHighCrystal, 75PC
Features
Features may also be described by the following terms: Good Surface Finish, Good Stiffness, Good Impact Resistance, Good Flow.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.

Injection	Nominal Value	Unit
Processing (Melt) Temp		°F
Mold Temperature		°F
Injection Rate

Notes

¹Typical properties: these are not to be construed as specifications.

²0.079 in/min

Xmod™ PC75

High Crystallinity Polypropylene

Supplied by Borealis AG