IDES Prospector Already have an account? Login Here

IDES

Aristech ALTAIR PLUS® (0.350 inch)

Acrylonitrile Butadiene Styrene + Acrylic (PMMA)

Supplied by Aristech Acrylics LLC

The technical datasheet with complete property values for Aristech ALTAIR PLUS® (0.350 inch) is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Aristech Acrylics LLC Altair Plus® is a composite engineered material which has the exceptional surface properties, weathering characteristics and aesthetics of Aristech Acrylics LLC Opaque Continuous Cast Acrylic and a substrate that imparts outstanding impact resistance and thermoformability.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Good Surface Finish
  • Good Weather Resistance
  • High Impact Resistance
  • Low to No Odor
  • Low to No Taste
  • Pleasing Surface Appearance
Forms 
  • Sheet
Processing Method 
  • Thermoforming
Physical
Nominal Value
Unit
Test Method
Specific Gravity 2
 
 ASTM D792
Water Absorption (Saturation, 0.350 in)
%
 ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (0.350 in)
psi
 ASTM D638
Tensile Strength (Yield, 0.350 in)
psi
 ASTM D638
Tensile Elongation (Break, 0.350 in)
%
 ASTM D638
Flexural Modulus
     ASTM D790
0.350 in 3
psi
  
0.350 in 4
psi
  
Flexural Strength
     ASTM D790
0.350 in 3
psi
  
0.350 in 4
psi
  
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (0.350 in)
ft·lb/in
 ASTM D256A
Instrumented Dart Impact 5 (0.350 in)
in·lb
 Internal Method
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (M-Scale, 0.350 in)
 
 ASTM D785
Barcol Hardness (0.350 in)
 
 ASTM D2583
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed, 0.350 in)
°F
 ASTM D648
CLTE - Flow (0.350 in)
in/in/°F
 ASTM D696
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.350 in)
 
 UL 94
Additional Information
Nominal Value
Unit
Test Method
Cycles Freeze-Thaw - 50 (-20 to 180°F, 0.35 in)
 
 Internal Method
Hot Forming Temperature
     Internal Method
ABS Side: 0.35 in
°F
  
Acrylic Side: 0.35 in
°F
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Aristech ALTAIR PLUS®, Aristech ALTAIR PLUS, Aristech ALTAIR PLUS® (0.350 inch), Aristech ALTAIR PLUS 0350 inch, Aristech , AristechALTAIRPLUS0350inch, ALTAIR PLUS®, ALTAIR PLUS, ALTAIR PLUS 0 350 inch, ALTAIR PLUS® (0.350 inch), ALTAIR PLUS 0350 inch, ALTAIRPLUS, PLUS0, 0350, 350inch, ALTAIRPLUS0350inch, Acrylonitrile Butadiene Styrene + Acrylic, Acrylonitrile Butadiene Styrene Acrylic, Acrylonitrile Butadiene Styrene + Acrylic (PMMA), Acrylonitrile Butadiene Styrene Acrylic PMMA, Acrylonitrile Butadiene Styrene : Acrylic (PMMA), Acrylonitrile Butadiene Styrene : Acrylic, Acrylonitrile Butadiene Styrene / Acrylic (PMMA), Acrylonitrile Butadiene Styrene / Acrylic, Acrylonitrile Butadiene Styrene - Acrylic (PMMA), Acrylonitrile Butadiene Styrene - Acrylic, Acrylonitrile Butadiene Styrene _ Acrylic (PMMA), Acrylonitrile Butadiene Styrene _ Acrylic, Acrylonitrile Butadiene Styrene Acrylic (PMMA), Acrylonitrile Butadiene Styrene Acrylic, ABS+Acrylic, ABSAcrylic, ABS:Acrylic, ABS/Acrylic, ABS-Acrylic, ABS_Acrylic, ABS Acrylic, Acrylonitrile Butadiene Styrene, ABS, Aristech Acrylics, AcrylonitrileButadieneStyreneAcrylicPMMA, Acrylonitrile Butadiene Styrene _ Acrylic PMMA, AcrylonitrileButadieneStyrene, AcrylonitrileButadieneStyrene_AcrylicPMMA, PLUSALTAIR
Features
Features may also be described by the following terms: Good Weather Resistance, Weather Resistant, Good Surface Finish, High Impact Resistance, Pleasing Surface Appearance, Low Odor, Low Taste.
Notes
1Typical properties: these are not to be construed as specifications.
20.350 in
3Acrylic in Tension
4Acrylic in Compression
5FTMS 406-M-1074
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.