Isocor 4011 Shakespeare Polyamide 6/69 Copolymer

Product Description

Isocor™ 4011 is a high viscosity PA-6/69. This resin is specifically suited for applications requiring superior toughness and abrasion resistance. Isocor™ 4011 is also used in applications requiring good electrical insulation properties. This resin can be processed using conventional techniques.

Typical applications for 4011 include:

cable jacketing

film extrusions

monofilaments / bristles

impact modifier

electrical connectors

trimmer line

General

Material Status

Commercial: Active

Availability

Europe

North America

Additive

Impact Modifier

Features

Electrically Insulating

Good Abrasion Resistance

High Viscosity

Impact Modified

Ultra High Toughness

Uses

Cable Jacketing

Connectors

Electronic Insulation

Monofilaments

Forms

Pellets

Processing Method

Film Extrusion

Injection Molding

Physical	Dry	Conditioned	Unit	Test Method
Specific Gravity		--		ASTM D792
Molding Shrinkage - Flow (0.125 in)		--	in/in	ASTM D955
Water Absorption (24 hr)		--	%	ASTM D570
Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Strength			psi	ASTM D638
Tensile Elongation (Break)			%	ASTM D638
Flexural Modulus			psi	ASTM D790
Impact	Dry	Conditioned	Unit	Test Method
Notched Izod Impact				ASTM D256
Hardness	Dry	Conditioned	Unit	Test Method
Durometer Hardness (Shore D)		--		ASTM D2240
Thermal	Dry	Conditioned	Unit	Test Method
Deflection Temperature Under Load				ASTM D648
66 psi, Unannealed		--	°F
264 psi, Unannealed		--	°F
Melting Temperature		--	°F	DSC
Related Terminology
Dry	Product names can be difficult to match. You may have searched any one of these terms to find this product: Isocor™ 4011, Isocor 4011, Isocor™ , Isocor, Isocor4011, 4011, Polyamide 6/69 Copolymer, Polyamide 669 Copolymer, Polyamide 6:69 Copolymer, Polyamide 6+69 Copolymer, Polyamide 6-69 Copolymer, Polyamide 6_69 Copolymer, Polyamide 6 69 Copolymer, Nylon 6/69, Nylon 669, Nylon 6:69, Nylon 6+69, Nylon 6-69, Nylon 6_69, Nylon 6 69, Polyamide, Nylon, Shakespeare, Polyamide669Copolymer, Nylon669, Polyamide6_69Copolymer, Nylon6_69
Generic Name
Dry	Generic Name may also be described by the following terms: PA6/69.
Conditioned	Generic Name may also be described by the following terms: PA6/69.
Features
Dry	Features may also be described by the following terms: High Viscosity, Ultra High Toughness, Good Abrasion Resistance, Abrasion Resistant.
Uses
Dry	Uses may also be described by the following terms: Electronic Insulation, Monofilaments, Monofilament.
Conditioned	Product names can be difficult to match. You may have searched any one of these terms to find this product: Isocor™ 4011, Isocor 4011, Isocor™ , Isocor, Isocor4011, 4011, Polyamide 6/69 Copolymer, Polyamide 669 Copolymer, Polyamide 6:69 Copolymer, Polyamide 6+69 Copolymer, Polyamide 6-69 Copolymer, Polyamide 6_69 Copolymer, Polyamide 6 69 Copolymer, Nylon 6/69, Nylon 669, Nylon 6:69, Nylon 6+69, Nylon 6-69, Nylon 6_69, Nylon 6 69, Polyamide, Nylon, Shakespeare, Polyamide669Copolymer, Nylon669, Polyamide6_69Copolymer, Nylon6_69

Injection	Dry	Unit
Dew Point		°F
Suggested Max Moisture		%
Hopper Temperature		°F
Rear Temperature		°F
Middle Temperature		°F
Front Temperature		°F
Nozzle Temperature		°F
Processing (Melt) Temp		°F
Mold Temperature		°F
Injection Pressure		psi
Injection Rate
Back Pressure		psi
Extrusion	Dry	Unit
Suggested Max Moisture		%
Hopper Temperature		°F
Cylinder Zone 1 Temp.		°F
Cylinder Zone 2 Temp.		°F
Cylinder Zone 3 Temp.		°F
Cylinder Zone 4 Temp.		°F
Die Temperature		°F
Extrusion Notes
Flange: 500°F (260°C) Air Dew Point (max): 0°F (-18°C) Neck: 500°F (260°C) Head: 500°F (260°C) Pump: 500°F (260°C) L/D Ratio: 24 to 30:1 Compression Ratio: 3.5:1 Polymer @ Die: 450°F (232°C) Screw Pressure: 2000 psi

Notes

¹Typical properties: these are not to be construed as specifications.

Isocor™ 4011

Polyamide 6/69 Copolymer

Supplied by Shakespeare Monofilaments and Specialty Polymers