Isocor 6105 Shakespeare Polyamide 610

Product Description

Isocor™ 6105 is a medium viscosity PA-610. This resin is specifically suited for applications requiring low moisture absorption and greater dimensional stability. Isocor™ 6105 is also used in applications requiring improved abrasion resistance. This resin can be processed using conventional techniques.

Typical applications for 6105 include:

cable jacketing

film extrusions

monofilaments / bristles

automotive tubing

General

Material Status

Commercial: Active

Availability

Europe

North America

Features

Good Abrasion Resistance

Good Dimensional Stability

Low Moisture Absorption

Medium Viscosity

Uses

Automotive Applications

Cable Jacketing

Film

Monofilaments

Tubing

Forms

Pellets

Processing Method

Film Extrusion

Injection Molding

Physical	Dry	Conditioned	Unit	Test Method
Specific Gravity		--		ASTM D792
Molding Shrinkage - Flow (0.125 in)		--	in/in	ASTM D955
Water Absorption (24 hr)	--		%	ASTM D570
Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Strength			psi	ASTM D638
Tensile Elongation (Break)			%	ASTM D638
Flexural Modulus			psi	ASTM D790
Impact	Dry	Conditioned	Unit	Test Method
Notched Izod Impact			ft·lb/in	ASTM D256
Thermal	Dry	Conditioned	Unit	Test Method
Deflection Temperature Under Load				ASTM D648
66 psi, Unannealed			°F
264 psi, Unannealed			°F
Melting Temperature		--	°F	DSC
Related Terminology
Dry	Product names can be difficult to match. You may have searched any one of these terms to find this product: Isocor™ 6105, Isocor 6105, Isocor™ , Isocor, Isocor6105, 6105, Polyamide 610, Nylon 610, Polyamide, Nylon, Shakespeare, Polyamide610, Nylon610
Generic Name
Dry	Generic Name may also be described by the following terms: PA610, PA6/10.
Conditioned	Generic Name may also be described by the following terms: PA610, PA6/10.
Features
Dry	Features may also be described by the following terms: Medium Viscosity, Low Moisture Absorption, Low Water Absorption, Water Resistant, Moisture Resistant, Good Dimensional Stability, Dimensionally Stable, Good Abrasion Resistance, Abrasion Resistant.
Uses
Dry	Uses may also be described by the following terms: Monofilaments, Monofilament, Tubing, Tube, Automotive Applications, Automotive Sector.
Conditioned	Product names can be difficult to match. You may have searched any one of these terms to find this product: Isocor™ 6105, Isocor 6105, Isocor™ , Isocor, Isocor6105, 6105, Polyamide 610, Nylon 610, Polyamide, Nylon, Shakespeare, Polyamide610, Nylon610

Injection	Dry	Unit
Dew Point		°F
Suggested Max Moisture		%
Hopper Temperature		°F
Rear Temperature		°F
Middle Temperature		°F
Front Temperature		°F
Nozzle Temperature		°F
Processing (Melt) Temp		°F
Mold Temperature		°F
Injection Pressure		psi
Injection Rate
Back Pressure		psi
Extrusion	Dry	Unit
Suggested Max Moisture		%
Hopper Temperature		°F
Cylinder Zone 1 Temp.		°F
Cylinder Zone 2 Temp.		°F
Cylinder Zone 3 Temp.		°F
Cylinder Zone 4 Temp.		°F
Die Temperature		°F
Extrusion Notes
Flange: 500°F (260°C) Air Dew Point (max): 0°F (-18°C) Neck: 500°F (260°C) Head: 480°F (250°C) Pump: 480°F (250°C) L/D Ratio: 24 to 30:1 Compression Ratio: 3.5:1 Polymer @ Die: 430°F (220°C) Screw Pressure: 2000 psi

Notes

¹Typical properties: these are not to be construed as specifications.

Isocor™ 6105

Polyamide 610

Supplied by Shakespeare Monofilaments and Specialty Polymers