IDES Prospector Already have an account? Login Here

IDES

Isocor™ HW29TL

Polyamide 610

Supplied by Shakespeare Monofilaments and Specialty Polymers

The technical datasheet with complete property values for Isocor™ HW29TL is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Isocor™ HW29TL is a ultra low viscosity PA-610 with excellent melt flow characteristics. Isocor™ HW29TL is specifically formulated for thin wall or high speed injection molding applications. This resin is suitable for applications requiring low moisture absorption and greater dimensional stability. This resin can be processed using conventional techniques.

Typical applications for Isocor™ HW29TL include:
  • thin-wall injection molding
  • electrical connectors
  • small parts-high output
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  
Features 
  • Good Dimensional Stability
  • Low Moisture Absorption
  • Low Viscosity
Uses 
  • Connectors
  • Electrical/Electronic Applications
  • Thin-walled Parts
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Dry
Conditioned
Unit
Test Method
Specific Gravity
--
 
 ASTM D792
Molding Shrinkage - Flow (0.125 in)
--
in/in
 ASTM D955
Water Absorption (24 hr)
--
%
 ASTM D570
Mechanical
Dry
Conditioned
Unit
Test Method
Tensile Strength
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Taber Abrasion Resistance (1000 Cycles)
--
mg
 ASTM D1044
Impact
Dry
Conditioned
Unit
Test Method
Notched Izod Impact
ft·lb/in
 ASTM D256
Thermal
Dry
Conditioned
Unit
Test Method
Deflection Temperature Under Load
       ASTM D648
66 psi, Unannealed
°F
  
264 psi, Unannealed
°F
  
Melting Temperature
--
°F
 DSC
Related Terminology
Dry
Product names can be difficult to match. You may have searched any one of these terms to find this product: Isocor™ HW29TL, Isocor HW29TL, Isocor™ , Isocor, IsocorHW29TL, HW 29 TL, HW29TL, HW29, 29TL, Polyamide 610, Nylon 610, Polyamide, Nylon, Shakespeare, Polyamide610, Nylon610, 29HW
Generic Name
Dry
Generic Name may also be described by the following terms: PA610, PA6/10.
Conditioned
Generic Name may also be described by the following terms: PA610, PA6/10.
Features
Dry
Features may also be described by the following terms: Low Viscosity, Low Moisture Absorption, Low Water Absorption, Water Resistant, Moisture Resistant, Good Dimensional Stability, Dimensionally Stable.
Uses
Dry
Uses may also be described by the following terms: Thin-walled Parts, Thin Walled Parts, Thin-wall Parts, Thin wall Parts, Thinwall Parts, Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector.
Conditioned
Product names can be difficult to match. You may have searched any one of these terms to find this product: Isocor™ HW29TL, Isocor HW29TL, Isocor™ , Isocor, IsocorHW29TL, HW 29 TL, HW29TL, HW29, 29TL, Polyamide 610, Nylon 610, Polyamide, Nylon, Shakespeare, Polyamide610, Nylon610, 29HW
Injection
Dry
Unit
 
Dew Point
°F
  
Suggested Max Moisture
%
  
Hopper Temperature
°F
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Pressure
psi
  
Injection Rate
 
  
Back Pressure
psi
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.