IDES Prospector Already have an account? Login Here

IDES

Arnitel® EM402-L

Thermoplastic Copolyester Elastomer

Supplied by DSM Engineering Plastics

The technical datasheet with complete property values for Arnitel® EM402-L is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  
RoHS Compliance 
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Volume-Flow Rate (MVR) (230°C/2.16 kg)
in³/10min
 ISO 1133
Water Absorption
     ISO 62
Saturation, 73°F
%
  
Equilibrium, 73°F, 50% RH
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2
Tensile Stress
     ISO 527-2
Break
psi
  
100% Strain
psi
  
Tensile Stress - 10% Strain
psi
 ISO 527-2
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-22°F
 
  
73°F
 
  
Notched Izod Impact Strength (73°F)
 
 ISO 180/1A
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Melting Temperature 2
°F
 ISO 11357-3
CLTE
     ISO 11359-2
Flow
in/in/°F
  
Transverse
in/in/°F
  
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity
ohm·cm
 IEC 60093
Relative Permittivity
     IEC 60250
100 Hz
 
  
1 MHz
 
  
Dissipation Factor
     IEC 60250
100 Hz
 
  
1 MHz
 
  
Comparative Tracking Index
V
 IEC 60112
Electric Strength
V/mil
 IEC 60243-1
Flammability
Nominal Value
Unit
Test Method
Flammability Classification (0.0630 in)
 
 IEC 60695-11-10, -20
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Arnitel® EM402-L, Arnitel EM402L, Arnitel® , Arnitel, ArnitelEM402L, EM 402, EM 402 L, EM402-L, EM402L, EM402:L, EM402/L, EM402+L, EM402_L, EM402 L, EM402, 402L, Thermoplastic Copolyester Elastomer, TPC-ET, TPCET, TPC:ET, TPC/ET, TPC+ET, TPC_ET, TPC ET, Thermoplastic Elastomer, TPE, DSM EP, ThermoplasticCopolyesterElastomer, ThermoplasticElastomer, 402EM
Notes
1Typical properties: these are not to be construed as specifications.
210°C/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.