Aegis HCA95ZP Honeywell Polyamide 66/6 Copolymer

Product Description

Aegis HCA95ZP is a lubricated high viscosity, nylon 6/6,6 extrusion grade copolymer for cast or blown film. It conforms to Food and Drug Administration requirements of 21 CFR 177.1500. It possesses the combination of strength and toughness associated with N6/6,6 as well as excellent heat, chemical, and abrasion resistance.The reduced melt point (385 deg F/196 deg C) of this resin results in lower process melt temperature, lower head pressure, and lower amperage.This translates to higher extrusion rates and thinner nylon layer capabilities. It will also thermoform at lower temperatures and yield higher production rates.

General

Material Status

Commercial: Active

Availability

North America

Additive

Lubricant

Features

Copolymer

Good Abrasion Resistance

Good Chemical Resistance

Good Strength

Good Toughness

High Heat Resistance

High Viscosity

Lubricated

Uses

Cast Film

Packaging

Agency Ratings

Forms

Pellets

Processing Method

Blown Film

Cast Film

Extrusion

Thermoforming

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (235°C/1.0 kg)		g/10 min	ASTM D1238
Water Absorption			ASTM D570
24 hr		%
Saturation		%
Equilibrium		%
Films	Nominal Value	Unit	Test Method
Oxygen Permeability		cm³·mil/100in²/atm/24 hr	ASTM D3985
Thermal	Nominal Value	Unit	Test Method
Melting Temperature		°F
Additional Information
FAV, ASTM D789: 95 96% SAV: 3.31 Nitrogen Permeability: 7.8 (0.503) cc/m²/day (cc/100in²/day) Carbon Dioxide Permeability: 113 (7.290) cc/m²/day (cc/100in²/day)
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Aegis® HCA95ZP, Aegis HCA95ZP, Aegis® , Aegis, AegisHCA95ZP, HCA 95 ZP, HCA95ZP, HCA95, 95ZP, Polyamide 66/6 Copolymer, Polyamide 666 Copolymer, Polyamide 66:6 Copolymer, Polyamide 66+6 Copolymer, Polyamide 66-6 Copolymer, Polyamide 66_6 Copolymer, Polyamide 66 6 Copolymer, Nylon 66/6, Nylon 666, Nylon 66:6, Nylon 66+6, Nylon 66-6, Nylon 66_6, Nylon 66 6, Polyamide, Nylon, pa666, Honeywell, Polyamide666Copolymer, Nylon666, Polyamide66_6Copolymer, Nylon66_6, 95HCA
Generic Name
Generic Name may also be described by the following terms: PA666, PA66/6.
Features
Features may also be described by the following terms: High Viscosity, Good Strength, Good Toughness, Tough, High Heat Resistance, Good Chemical Resistance, Chemical Resistant, Good Abrasion Resistance, Abrasion Resistant.
Uses
Uses may also be described by the following terms: Cast Film.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).

Extrusion	Nominal Value	Unit
Drying Temperature		°F
Suggested Max Moisture		%
Cylinder Zone 1 Temp.		°F
Cylinder Zone 2 Temp.		°F
Cylinder Zone 3 Temp.		°F
Cylinder Zone 4 Temp.		°F
Cylinder Zone 5 Temp.		°F
Adapter Temperature		°F
Melt Temperature		°F
Die Temperature		°F
Extrusion Notes
The values listed above in Extrusion are for cast film. Typical Barrel Profile for Tubular (Blown) Films: Barrel Temperature: 225 to 245°C (437 to 473°F) Adapter Temperature: 243°C (470°F) Die Temperature: 240°C (464°F) Processing Melt Temperature: 243°C (470°F) Screw Parameters: Metering section: 40% Transition section: 3 to 4 flights Feed section balance of screw length Compression ratio: 3.5:1 to 4.0:1

Notes

¹Typical properties: these are not to be construed as specifications.

Aegis® HCA95ZP

Polyamide 66/6 Copolymer

Supplied by Honeywell